Re: [PATCH] i3c: dw: reduce do_daa time if there's no client

On Thu, Aug 13, 2026 at 04:45:00PM -0400, Frank Li wrote:
> On Thu, Aug 13, 2026 at 12:56:09PM +0800, Jisheng Zhang wrote:
> > On Wed, Aug 05, 2026 at 04:05:35PM -0400, Frank Li wrote:
> > > On Mon, Aug 03, 2026 at 10:03:07PM +0800, Jisheng Zhang wrote:
> > > > If there's no client, wait for completion will timeout, then there's no
> > > > need to add i3c dev at all. This can save boot time by ~6s if there's
> > > > no client connected to the i3c interface.
> > > >
> > > > Signed-off-by: Jisheng Zhang <[email protected]>
> > > > ---
> > > >  drivers/i3c/master/dw-i3c-master.c | 4 +++-
> > > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
> > > > index 0625587f1527..18ebf304029a 100644
> > > > --- a/drivers/i3c/master/dw-i3c-master.c
> > > > +++ b/drivers/i3c/master/dw-i3c-master.c
> > > > @@ -885,8 +885,10 @@ static int dw_i3c_master_daa(struct i3c_master_controller *m)
> > > >  		      COMMAND_PORT_ROC;
> > > >
> > > >  	dw_i3c_master_enqueue_xfer(master, xfer);
> > > > -	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT))
> > > > +	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) {
> > > >  		dw_i3c_master_dequeue_xfer(master, xfer);
> > > > +		goto rpm_out;
> > >
> > > not sure why save 6s. timeout already happen, does register i3c device
> > > takes 6s?
> >
> > sorry, typo, s/6/4
> > For example if the maxdev == 4, when there's no i3c device connected, the
> > max cmd->rx_len = 0 after timeout, then newdevs = 0xf, then go through
> > the i3c_master_add_i3c_dev_locked(), each take ~1s, so adds up to 4s
> 
> 
> https://lore.kernel.org/linux-i3c/[email protected]/
> 
> Need fix newdevs, it should be 0, not 0xf.

Aha, this method also works. Let me cook a new version

Thanks a lot
> 
> Frank
> 
> >
> > >
> > > And if do_daa find 3 devices, then timeout, you skip register found 3
> > > devices.
> >
> > It's the addr assign cmd timeout, so if 3 devices respond, the addr
> > assign cmd won't timeout.
> >
> > >
> > > Frank
> > >
> > > > +	}
> > > >
> > > >  	newdevs = GENMASK(master->maxdevs - cmd->rx_len - 1, 0);
> > > >  	newdevs &= ~olddevs;
> > > > --
> > > > 2.53.0
> > > >

-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c