[PATCH 1/3] dt-bindings: i3c: xlnx: Add IBI and hot-join capability properties

In-Band Interrupt and Hot-Join are synthesis-time options of the AXI I3C
IP. Describe them with two boolean properties.

A Hot-Join request is acknowledged by the IBI machinery, so a hot-join
capable design is always IBI capable as well. Both events are reported
through the controller interrupt, which is therefore required whenever
the capability is present.

Signed-off-by: Shubham Patil <[email protected]>
---
 .../bindings/i3c/xlnx,axi-i3c-1.0.yaml        | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml
index 2caa245a8656..07e3d0b4d767 100644
--- a/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml
+++ b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml
@@ -32,13 +32,34 @@ properties:
   interrupts:
     maxItems: 1
 
+  xlnx,ibi-capable:
+    type: boolean
+    description:
+      The IP is synthesized with In-Band Interrupt support. IBIs are reported
+      through the controller interrupt.
+
+  xlnx,hj-capable:
+    type: boolean
+    description:
+      The IP is synthesized with Hot-Join support. A Hot-Join request is
+      acknowledged by the same machinery as an In-Band Interrupt.
+
 required:
   - compatible
   - reg
   - clocks
 
+dependencies:
+  xlnx,hj-capable: ["xlnx,ibi-capable"]
+
 allOf:
   - $ref: i3c.yaml#
+  - if:
+      required:
+        - xlnx,ibi-capable
+    then:
+      required:
+        - interrupts
 
 unevaluatedProperties: false
 
@@ -54,5 +75,7 @@ examples:
         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
         #address-cells = <3>;
         #size-cells = <0>;
+        xlnx,ibi-capable;
+        xlnx,hj-capable;
     };
 ...
-- 
2.34.1


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c