Re: [PATCH v3 1/3] i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
Frank Li <[email protected]>
| Newsgroups | org.infradead.lists.linux-i3c |
|---|---|
| Message-ID | <aoNliknLshqVQiMo@lizhi-Precision-Tower-5810> |
On Mon, Aug 17, 2026 at 04:26:45PM +0800, Jian-Ming Liao wrote:
> In PIO mode initialization, STAT_IBI_STATUS_THLD was missing from
> pio->enabled_irqs. As a result, the host controller interrupt signal for
> IBI threshold was never enabled when transfer starts, preventing IBI
> status descriptors from being properly processed in PIO mode.
>
> Include STAT_IBI_STATUS_THLD in pio->enabled_irqs so that the IBI
> threshold interrupt is activated alongside error interrupts upon the first
> transfer.
>
> Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")
> Co-developed-by: Patrick Yen <[email protected]>
> Signed-off-by: Patrick Yen <[email protected]>
> Signed-off-by: Jian-Ming Liao <[email protected]>
> ---
Reviewed-by: Frank Li <[email protected]>
> v3:
> - Added Fixes tag (Adrian).
> - Updated commit message and code comment to accurately reflect that
> STAT_IBI_STATUS_THLD is activated on the first transfer (Adrian).
> - Aligned From: and Signed-off-by: email addresses (Adrian).
> v2:
> - Removed "Hot-Join" references from the commit message and comments,
> as the change focuses strictly on enabling STAT_IBI_STATUS_THLD
> for general IBI reception per HCI spec.
>
> drivers/i3c/master/mipi-i3c-hci/pio.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i3c/master/mipi-i3c-hci/pio.c b/drivers/i3c/master/mipi-i3c-hci/pio.c
> index ff2657ee220b..a1341d66bc65 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/pio.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/pio.c
> @@ -185,8 +185,11 @@ static void __hci_pio_init(struct i3c_hci *hci, u32 *size_val_ptr)
> pio_reg_write(INTR_SIGNAL_ENABLE, 0x0);
> pio_reg_write(INTR_STATUS_ENABLE, 0xffffffff);
>
> - /* Always accept error interrupts (will be activated on first xfer) */
> - pio->enabled_irqs = STAT_ALL_ERRORS;
> + /*
> + * Always accept error interrupts and IBI threshold interrupt
> + * (will be activated on first xfer).
> + */
> + pio->enabled_irqs = STAT_ALL_ERRORS | STAT_IBI_STATUS_THLD;
> }
>
> static void hci_pio_suspend(struct i3c_hci *hci)
> --
> 2.43.0
>
>
> --
> linux-i3c mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-i3c
--
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c