Re: [PATCH v1] pmdomain: mediatek: Fix MT8183 hang on boot

Brady Norander <[email protected]>
Newsgroups org.infradead.lists.linux-mediatek,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pm
Message-ID <[email protected]>
On 7/22/26 09:27, Dmitry Osipenko wrote:
> Depending on firmware, part of the MFG domains may be left ON at boot
> leaving only some MFG cores powered, to let the ACP to prefetch the GPU
> region when the display controller is brought up. This doesn't play well
> with an eventual delay in probing Panfrost when the display controller is
> fully set up, as that would make genpd's sync_state() to power off the
> domain while ACP tries to prefetch: this is causing an AXI stall,
> effectively freezing the AP indefinitely. In order to prevent this from
> happening, the sync_state() functionality must be obliterated on all of
> the MFG domains: while this guarantees a power leakage if the bootloader
> boots the kernel with MFG PDs partially powered on, this is the only way
> to ensure stable operation of the SoC during boot on devices with such
> firmware because, of course, those will never officially receive a
> firmware update.
> 
> Fixes Kappa Chromebook hanging during system boot.

I also saw this same issue on my MT8192 Hayato Chromebook, and I also 
saw an issue on my MT8183 and MT8186 Chromebooks where the audio was 
broken. I fixed all of those issues by setting the GENPD_FLAG_NO_STAY_ON 
flag on all domains. I held off from submitting that change as I was 
unsure if it was the "correct" way to handle it, but perhaps it is. 
Either way, this issue is not specific to only MT8183.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.