[PATCH v9 11/36] pinctrl: airoha: fix I2C pin mux config for AN7583

From: Daniel Schwierzeck <[email protected]>

On AN7583 both I2C busses have a pin sharing with GPIO. Also the pin mux
setting is done in REG_GPIO_PON_MODE instead of REG_GPIO_2ND_I2C_MODE.

Add dedicated I2C pin groups and function groups for AN7583. The new
groups must support i2c0 and i2c1.

Signed-off-by: Daniel Schwierzeck <[email protected]>
---
 drivers/pinctrl/airoha/pinctrl-airoha.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/airoha/pinctrl-airoha.c b/drivers/pinctrl/airoha/pinctrl-airoha.c
index db6644bcd3aba..ff77a7832d11b 100644
--- a/drivers/pinctrl/airoha/pinctrl-airoha.c
+++ b/drivers/pinctrl/airoha/pinctrl-airoha.c
@@ -896,6 +896,7 @@ static const char *const uart_groups[] = { "uart2", "uart2_cts_rts", "hsuart",
 					   "hsuart_cts_rts", "uart4",
 					   "uart5" };
 static const char *const i2c_groups[] = { "i2c1" };
+static const char *const an7583_i2c_groups[] = { "i2c0", "i2c1" };
 static const char *const jtag_groups[] = { "jtag_udi", "jtag_dfd" };
 static const char *const pcm_groups[] = { "pcm1", "pcm2" };
 static const char *const spi_groups[] = { "spi_quad", "spi_cs1" };
@@ -1165,6 +1166,28 @@ static const struct airoha_pinctrl_func_group i2c_func_group[] = {
 	},
 };
 
+static const struct airoha_pinctrl_func_group an7583_i2c_func_group[] = {
+	{
+		.name = "i2c0",
+		.regmap[0] = {
+			AIROHA_FUNC_MUX,
+			REG_GPIO_PON_MODE,
+			AN7583_I2C0_SCL_GPIO_MODE_MASK | AN7583_I2C0_SDA_GPIO_MODE_MASK,
+			0
+		},
+		.regmap_size = 1,
+	}, {
+		.name = "i2c1",
+		.regmap[0] = {
+			AIROHA_FUNC_MUX,
+			REG_GPIO_PON_MODE,
+			AN7583_I2C1_SCL_GPIO_MODE_MASK | AN7583_I2C1_SDA_GPIO_MODE_MASK,
+			0
+		},
+		.regmap_size = 1,
+	},
+};
+
 static const struct airoha_pinctrl_func_group jtag_func_group[] = {
 	{
 		.name = "jtag_udi",
@@ -1966,7 +1989,7 @@ static const struct airoha_pinctrl_func an7583_pinctrl_funcs[] = {
 	PINCTRL_FUNC_DESC("sipo", sipo),
 	PINCTRL_FUNC_DESC("mdio", an7583_mdio),
 	PINCTRL_FUNC_DESC("uart", uart),
-	PINCTRL_FUNC_DESC("i2c", i2c),
+	PINCTRL_FUNC_DESC("i2c", an7583_i2c),
 	PINCTRL_FUNC_DESC("jtag", jtag),
 	PINCTRL_FUNC_DESC("pcm", pcm),
 	PINCTRL_FUNC_DESC("spi", spi),
-- 
2.53.0