Re: [PATCH v2] arm64: dts: mediatek: mt8390-genio-common: add boot phase tags

"Carlo Caione" <[email protected]>
Newsgroups org.infradead.lists.linux-mediatek,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]> 
On Thu Jul 30, 2026 at 10:04 AM CEST, Carlo Caione wrote:
> U-Boot SPL runs after the platform DDR loader has initialized DRAM on
> the Genio 510 and Genio 700 EVKs. It needs the debug UART and eMMC
> controller, together with their clock, syscon, pinctrl, interrupt and
> watchdog providers, to load the firmware FIT.
>
> Mark the nodes consumed by the current SPL configuration with
> 'bootph-pre-ram' so that the canonical devicetree carries the boot-phase
> information and bootloaders do not need local overrides.

Gentle ping on this.

Cheers,

--
Carlo Caione
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.