Re: [PATCH v2 0/4] mtd: rawnand: qcom: Add MDM9607
Miquel Raynal <[email protected]>
| Newsgroups | org.infradead.lists.linux-mtd,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 07 Jul 2026 13:56:00 +0200, Stephan Gerhold wrote:
> MDM9607 has QPIC v1.5 that supports the OP_PAGE_READ_ONFI_READ command, but
> is missing the rest of the hardware changes in QPIC v2. There is also only
> a single clock that can be controlled using the RPM firmware. Document and
> add the new qcom,mdm9607-nand compatible for this setup.
>
>
Applied to nand/next, thanks!
[1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller
commit: 4529aababe4212b9b6d70e83ceb6a99f9691c811
[2/4] mtd: rawnand: qcom: Make "aon" clock optional
commit: 533ec816312baecdb45bbcb8a279c6561aa71215
[3/4] mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2
commit: 0732595d2f8cf846be3327c8c9453eb10b10ed39
[4/4] mtd: rawnand: qcom: Add MDM9607 compatible
commit: 69e3c504e18bf1fec03fdf6293320860ec832af8
Patche(s) should be available on mtd/linux.git and will be
part of the next PR (provided that no robot complains by then).
Kind regards,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/