[PATCH v5 05/17] spi: spi-mem: add execute_tuning callback and spi_mem_execute_tuning()

Add an execute_tuning callback to struct spi_controller_mem_ops. The
callback receives a mandatory read op template and an optional write op
template. On success the controller sets op->max_freq in each provided
template to the validated clock rate.

Add the corresponding spi_mem_execute_tuning() wrapper that checks for
callback availability and returns -EOPNOTSUPP when the controller has
not implemented it, allowing callers to handle controllers that do not
support tuning gracefully.

Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Santhosh Kumar K <[email protected]>
---
 drivers/spi/spi-mem.c       | 31 +++++++++++++++++++++++++++++++
 include/linux/spi/spi-mem.h | 14 ++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index e20eca1b8245..ae9e2d7ac6f3 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -660,6 +660,37 @@ u64 spi_mem_calc_op_duration(struct spi_mem *mem, struct spi_mem_op *op)
 }
 EXPORT_SYMBOL_GPL(spi_mem_calc_op_duration);
 
+/**
+ * spi_mem_execute_tuning() - Execute controller tuning procedure
+ * @mem: the SPI memory device
+ * @read_op: read operation template (mandatory)
+ * @write_op: write operation template (optional, may be NULL)
+ *
+ * Requests the controller to perform tuning for high-speed operation
+ * using the provided op templates. On success the controller callback
+ * sets @read_op->max_freq (and @write_op->max_freq when non-NULL) to
+ * the validated clock rate.
+ *
+ * Return: 0 on success, -EINVAL if @mem or @read_op is NULL,
+ *         -EOPNOTSUPP if the controller doesn't support tuning,
+ *         or a negative error code on failure.
+ */
+int spi_mem_execute_tuning(struct spi_mem *mem, struct spi_mem_op *read_op,
+			   struct spi_mem_op *write_op)
+{
+	struct spi_controller *ctlr;
+
+	if (!mem || !read_op)
+		return -EINVAL;
+
+	ctlr = mem->spi->controller;
+	if (!ctlr->mem_ops || !ctlr->mem_ops->execute_tuning)
+		return -EOPNOTSUPP;
+
+	return ctlr->mem_ops->execute_tuning(mem, read_op, write_op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_execute_tuning);
+
 static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
 				      u64 offs, size_t len, void *buf)
 {
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index f660bb2e9f85..ef5a6d60bae9 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -346,6 +346,15 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
  * @poll_status: poll memory device status until (status & mask) == match or
  *               when the timeout has expired. It fills the data buffer with
  *               the last status value.
+ * @execute_tuning: run the controller tuning procedure using the provided
+ *		    read and optional write op templates. On success, set
+ *		    @read_op->max_freq (and @write_op->max_freq when non-NULL)
+ *		    to the validated clock rate. Return a negative errno on
+ *		    error. Return -EOPNOTSUPP if the controller has no tuning
+ *		    capability at all. Return 0 with @read_op->max_freq left at
+ *		    zero to signal that this specific op cannot be PHY-tuned
+ *		    (e.g. a hardware erratum blocks it) but another variant may
+ *		    succeed; the caller will iterate remaining op variants.
  *
  * This interface should be implemented by SPI controllers providing an
  * high-level interface to execute SPI memory operation, which is usually the
@@ -376,6 +385,8 @@ struct spi_controller_mem_ops {
 			   unsigned long initial_delay_us,
 			   unsigned long polling_rate_us,
 			   unsigned long timeout_ms);
+	int (*execute_tuning)(struct spi_mem *mem, struct spi_mem_op *read_op,
+			      struct spi_mem_op *write_op);
 };
 
 /**
@@ -465,6 +476,9 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
 void spi_mem_adjust_op_freq(struct spi_mem *mem, struct spi_mem_op *op);
 u64 spi_mem_calc_op_duration(struct spi_mem *mem, struct spi_mem_op *op);
 
+int spi_mem_execute_tuning(struct spi_mem *mem, struct spi_mem_op *read_op,
+			   struct spi_mem_op *write_op);
+
 bool spi_mem_supports_op(struct spi_mem *mem,
 			 const struct spi_mem_op *op);
 
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/