Re: [PATCH 2/2] mtd: spinand: winbond: add support for W25N01KW and W25N02LW
Miquel Raynal <[email protected]>
| Newsgroups | org.infradead.lists.linux-mtd,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Sadre, On 07/08/2026 at 12:13:39 +0530, Md Sadre Alam <[email protected]> wrote: > Add support for the Winbond W25N01KW and W25N02LW SPI-NAND > devices. > > The W25N01KW shares the same geometry, OOB layout, and ECC > status handling as the existing W25N01KV, while the W25N02LW > matches the existing W25N02KV/W25N02KW devices and reuses > their OOB layout and ECC status callback. > > Signed-off-by: Md Sadre Alam <[email protected]> > --- Sashiko raises a point: - [Medium] The device ID `0x12, 0x22` for W25N02LW breaks the established pattern for Winbond 1.8V SPI NAND devices and is highly likely a typo for `0xb2, 0x22`. Can you please check? Thanks, Miquèl ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/