[PATCH 5.10.y] nvmet-tcp: fix race between ICReq handling and queue teardown

Philo Lu <[email protected]>
Newsgroups org.infradead.lists.linux-nvme,org.kernel.vger.linux-kernel,org.kernel.vger.stable
Message-ID <[email protected]>
From: Chaitanya Kulkarni <[email protected]>

commit 5293a8882c549fab4a878bc76b0b6c951f980a61 upstream.

nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.

If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.

If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.

The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.

Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.

Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.

Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver")
Cc: [email protected]
Reported-by: Shivam Kumar <[email protected]>
Tested-by: Shivam Kumar <[email protected]>
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
[ context diff adaptation: drop `queue->state = NVMET_TCP_Q_FAILED` since
 the enum introduced in 6.7, 675b453e0241 ("nvmet-tcp: enable TLS handshake
 upcall" ]
Signed-off-by: Philo Lu <[email protected]>
---
 drivers/nvme/target/tcp.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index edcc0662c3e5..4bd82e9b113f 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -345,6 +345,19 @@ static void nvmet_tcp_build_pdu_iovec(struct nvmet_tcp_cmd *cmd)

 static void nvmet_tcp_fatal_error(struct nvmet_tcp_queue *queue)
 {
+	/*
+	 * Keep rcv_state at RECV_ERR even for the internal -ESHUTDOWN path.
+	 * nvmet_tcp_handle_icreq() can return -ESHUTDOWN after the ICReq has
+	 * already been consumed and queue teardown has started.
+	 *
+	 * If nvmet_tcp_data_ready() or nvmet_tcp_write_space() queues
+	 * nvmet_tcp_io_work() again before nvmet_tcp_release_queue_work()
+	 * cancels it, the queue must not keep that old receive state.
+	 * Otherwise the next nvmet_tcp_io_work() run can reach
+	 * nvmet_tcp_done_recv_pdu() and try to handle the same ICReq again.
+	 *
+	 * That is why queue->rcv_state needs to be updated before we return.
+	 */
 	queue->rcv_state = NVMET_TCP_RECV_ERR;
 	if (queue->nvme_sq.ctrl)
 		nvmet_ctrl_fatal_error(queue->nvme_sq.ctrl);
@@ -888,10 +901,24 @@ static int nvmet_tcp_handle_icreq(struct nvmet_tcp_queue *queue)
 	iov.iov_base = icresp;
 	iov.iov_len = sizeof(*icresp);
 	ret = kernel_sendmsg(queue->sock, &msg, &iov, 1, iov.iov_len);
-	if (ret < 0)
+	if (ret < 0) {
+		spin_lock_bh(&queue->state_lock);
+		if (queue->state == NVMET_TCP_Q_DISCONNECTING) {
+			spin_unlock_bh(&queue->state_lock);
+			return -ESHUTDOWN;
+		}
+		spin_unlock_bh(&queue->state_lock);
 		return ret; /* queue removal will cleanup */
+	}

+	spin_lock_bh(&queue->state_lock);
+	if (queue->state == NVMET_TCP_Q_DISCONNECTING) {
+		spin_unlock_bh(&queue->state_lock);
+		/* Tell nvmet_tcp_socket_error() teardown is in progress. */
+		return -ESHUTDOWN;
+	}
 	queue->state = NVMET_TCP_Q_LIVE;
+	spin_unlock_bh(&queue->state_lock);
 	nvmet_prepare_receive_pdu(queue);
 	return 0;
 }
--
2.47.3
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.