[PATCH v6 2/7] drm/bridge: Implement generic USB Type-C DP HPD bridge

Chaoyi Chen <[email protected]>
Newsgroups org.infradead.lists.linux-phy,org.freedesktop.lists.dri-devel,org.infradead.lists.linux-arm-kernel,org.infradead.lists.linux-rockchip,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
From: Chaoyi Chen <[email protected]>

The HPD function of Type-C DP is implemented through
drm_connector_oob_hotplug_event(). For embedded DP, it is required
that the DRM connector fwnode corresponds to the Type-C port fwnode.

To describe the relationship between the DP controller and the Type-C
port device, we usually using drm_bridge to build a bridge chain.

Now several USB-C controller drivers have already implemented the DP
HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
HPD bridge on USB-C connector port device.

But this requires the USB-C controller driver to manually register the
HPD bridge. If the driver does not implement this feature, the bridge
will not be create.

So this patch implements a generic DP HPD bridge based on
aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
Type-C port device containing the DP svid is registered, it will
create an HPD bridge for it without the need for the USB-C controller
driver to implement it.

Signed-off-by: Chaoyi Chen <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Nicolas Frattaroli <[email protected]>
---
Changes in v6:
- Avoid duplicate registration of the same DisplayPort HPD bridge. 

(no changes since v5)

Changes in v4:
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

(no changes since v3)

Changes in v2:
- Add copyright text.
- Remove useless goto.
---
 drivers/gpu/drm/bridge/Kconfig                | 10 +++
 drivers/gpu/drm/bridge/Makefile               |  1 +
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 67 +++++++++++++++++++
 3 files changed, 78 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 4a57d49b4c6d..9739b2a19758 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
 	  Simple bridge that terminates the bridge chain and provides HPD
 	  support.
 
+if DRM_AUX_HPD_BRIDGE
+config DRM_AUX_HPD_TYPEC_BRIDGE
+	tristate
+	depends on TYPEC || !TYPEC
+	default TYPEC
+	help
+	  Simple bridge that terminates the bridge chain and provides HPD
+	  support. It build bridge on each USB-C connector device node.
+endif
+
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 15cc821d85b7..d88a9e1ccc9a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
 obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
+obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
 obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
 obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
new file mode 100644
index 000000000000..682bc192e093
--- /dev/null
+++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Chaoyi Chen <[email protected]>
+ */
+#include <linux/of.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+
+#include <drm/bridge/aux-bridge.h>
+
+static int drm_typec_bus_event(struct notifier_block *nb, unsigned long action,
+			       void *data)
+{
+	struct device *dev = (struct device *)data;
+	struct typec_altmode *alt = to_typec_altmode(dev);
+	struct device_node *np;
+
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_OK;
+
+	/*
+	 * alt->dev.parent->parent : USB-C controller device
+	 * alt->dev.parent         : USB-C connector device
+	 */
+	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID) {
+		np = to_of_node(alt->dev.parent->fwnode);
+		if (!drm_dev_has_dp_hpd_bridge(alt->dev.parent->parent, np))
+			drm_dp_hpd_bridge_register(alt->dev.parent->parent, np);
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block drm_typec_event_nb = {
+	.notifier_call = drm_typec_bus_event,
+};
+
+static int check_device_already_added(struct device *dev, void *data)
+{
+	drm_typec_bus_event(NULL, BUS_NOTIFY_ADD_DEVICE, dev);
+	return 0;
+}
+
+static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
+{
+	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
+}
+
+static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
+{
+	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
+	/*
+	 * Before module initialization, some devices may have already been added.
+	 * Register the HPD bridge for these devices.
+	 */
+	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);
+	return 0;
+}
+
+module_init(drm_aux_hpd_typec_dp_bridge_module_init);
+module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
+
+MODULE_AUTHOR("Chaoyi Chen <[email protected]>");
+MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
+MODULE_LICENSE("GPL");
-- 
2.53.0


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.