[PATCH v6 07/10] phy: renesas: phy-rcar-gen3-usb2: Add RZ/G3L support
Biju <[email protected]>
| Newsgroups | org.infradead.lists.linux-phy,org.kernel.vger.linux-kernel,org.kernel.vger.linux-renesas-soc |
|---|---|
| Message-ID | <[email protected]> |
From: Biju Das <[email protected]> Add renesas,usb2-phy-r9a08g046 to the OF match table, reusing rz_g3s_phy_usb2_data as the PHY configuration is shared with RZ/G3S. While the PHY data is shared, RZ/G3L differs from RZ/G3S in that it has two OTG controllers, OTG interrupts on port 2, and a controllable OTG_PERI bit in COMMCTRL for host/device switching on the port 2 USB controller, which is fixed to host-only on RZ/G3S. Signed-off-by: Biju Das <[email protected]> --- v5->v6: * No change. v4->v5: * No change. v3->v4: * No change. v2->v3: * No change. v1->v2: * Updated commit description. --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 9a45d840efeb..d06fb52ed5f1 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -721,6 +721,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { .compatible = "renesas,usb2-phy-r9a08g045", .data = &rz_g3s_phy_usb2_data, }, + { + .compatible = "renesas,usb2-phy-r9a08g046", + .data = &rz_g3s_phy_usb2_data, + }, { .compatible = "renesas,usb2-phy-r9a09g057", .data = &rz_v2h_phy_usb2_data, -- 2.43.0 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy