Re: (subset) [PATCH 0/3] arm64: dts: imx95-15x15-frdm: support CAN transceivers sharing a silent GPIO
Vinod Koul <[email protected]>
| Newsgroups | org.infradead.lists.linux-phy,dev.linux.lists.imx,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-can,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 30 Jul 2026 12:33:25 +0800, [email protected] wrote: > On the i.MX95 15x15 FRDM board the two CAN transceivers (attached to > flexcan2 and flexcan5) share a single "silent" control pin, which is > routed through the on-board PCAL6524 GPIO expander. Both transceiver PHY > nodes therefore reference the same GPIO line for their silent-gpios > property. > > This series makes that sharing work correctly and puts the transceivers > into the proper default state: > > [...] Applied, thanks! [1/3] phy: phy-can-transceiver: default silent GPIO to high during probe commit: c3b0bb15ef001703b00d79bc4928e7421e24280d Best regards, -- ~Vinod -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy