[PATCH v1 2/4] phy: qcom: qmp-pcie: Add qref and refgen regulator vote for QCS8300 and SA8775p PHY

Add a new sa8775p_qmp_phy_vreg_l that includes vdda-phy, vdda-pll,
vdda-qref, vdda-refgen and refgen supplies, and use it for QCS8300
and SA8775p PCIe PHY configurations. This avoids modifying
sm8550_qmp_phy_vreg_l and breaking SM8550 and SM8650.

Note that due to a hardware issue, QREF actually depends on refgen3
rather than refgen2 as documented; refgen3 is therefore voted manually
via the refgen supply as a workaround.

Fixes: a05b6d5135ec ("phy: qcom-qmp-pcie: add support for sa8775p")
Fixes: ebf198f17b5a ("phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300")
Signed-off-by: Ziyue Zhang <[email protected]>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 27034bb62d0d..5d6186512c14 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -4018,6 +4018,10 @@ static const char * const sm8550_qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll", "vdda-qref",
 };
 
+static const char * const sa8775p_qmp_phy_vreg_l[] = {
+	"vdda-phy", "vdda-pll", "vdda-qref", "vdda-refgen", "refgen",
+};
+
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
 	"phy", "common",
@@ -4508,8 +4512,8 @@ static const struct qmp_phy_cfg qcs8300_qmp_gen4x2_pciephy_cfg = {
 
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
-	.vreg_list		= qmp_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.vreg_list		= sa8775p_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sa8775p_qmp_phy_vreg_l),
 	.regs			= pciephy_v5_regs_layout,
 
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
@@ -5218,8 +5222,8 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
 
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
-	.vreg_list		= qmp_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.vreg_list		= sa8775p_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sa8775p_qmp_phy_vreg_l),
 	.regs			= pciephy_v5_regs_layout,
 
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
@@ -5259,8 +5263,8 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = {
 
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
-	.vreg_list		= qmp_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.vreg_list		= sa8775p_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sa8775p_qmp_phy_vreg_l),
 	.regs			= pciephy_v5_regs_layout,
 
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-- 
2.43.0


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy