Re: [PATCH] phy: zynqmp: register PHY provider after probe initialization

On 07-08-26, 21:55, Radhey Shyam Pandey wrote:
> Register the OF PHY provider only after saved_regs allocation and
> runtime PM setup complete successfully. Publishing the provider
> mid-probe allowed concurrent consumers to obtain a phy via xpsgtr_xlate()
> while probe could still fail, leaving them with references into driver
> state that devres would free on the error path.

That fails for me!

> 
> Reported-by: Sashiko <[email protected]>
> Link: https://lore.kernel.org/all/[email protected]
> Fixes: b3db66f62446 ("phy: xilinx: add runtime PM support")
> Fixes: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume")
> Signed-off-by: Radhey Shyam Pandey <[email protected]>
> ---
>  drivers/phy/xilinx/phy-zynqmp.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
> index 240626b55475..8930cbe24b5a 100644
> --- a/drivers/phy/xilinx/phy-zynqmp.c
> +++ b/drivers/phy/xilinx/phy-zynqmp.c
> @@ -1060,13 +1060,6 @@ static int xpsgtr_probe(struct platform_device *pdev)
>  					    xpsgtr_status_read);
>  	}
>  
> -	/* Register the PHY provider. */
> -	provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
> -	if (IS_ERR(provider)) {
> -		dev_err(&pdev->dev, "registering provider failed\n");
> -		return PTR_ERR(provider);
> -	}
> -
>  	gtr_dev->saved_regs = devm_kmalloc(gtr_dev->dev,
>  					   sizeof(save_reg_address),
>  					   GFP_KERNEL);
> @@ -1082,6 +1075,14 @@ static int xpsgtr_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
> +	if (IS_ERR(provider)) {
> +		dev_err(&pdev->dev, "registering provider failed\n");
> +		pm_runtime_put(gtr_dev->dev);
> +		pm_runtime_disable(gtr_dev->dev);
> +		return PTR_ERR(provider);
> +	}
> +
>  	return 0;
>  }
>  
> 
> base-commit: ea2bff00da89d7767d677bb68470130ba96f4928

and this does not exist for me!

-- 
~Vinod

-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy