[PATCH v2 05/14] arm64: dts: qcom: ipq5018: Flatten usb controller node
George Moussalem via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.linux-phy,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-usb |
|---|---|
| Message-ID | <[email protected]> |
From: George Moussalem <[email protected]> Flatten usb controller node and update to using latest bindings and flattened driver approach. Signed-off-by: George Moussalem <[email protected]> --- arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 6 ++-- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 49 +++++++++++--------------- 2 files changed, 23 insertions(+), 32 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts index 33eef92b19b1..8efb2b21ed9e 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts @@ -110,11 +110,9 @@ data-pins { }; &usb { - status = "okay"; -}; - -&usb_dwc { dr_mode = "host"; + + status = "okay"; }; &usbphy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index d259a841ad17..965649db36f3 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -597,16 +597,9 @@ qpic_nand: spi@79b0000 { status = "disabled"; }; - usb: usb@8af8800 { - compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; - reg = <0x08af8800 0x400>; - - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", - "dp_hs_phy_irq", - "dm_hs_phy_irq"; + usb: usb@8a00000 { + compatible = "qcom,ipq5018-dwc3", "qcom,snps-dwc3"; + reg = <0x08a00000 0xe000>; clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, @@ -617,29 +610,29 @@ usb: usb@8af8800 { "sleep", "mock_utmi"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + resets = <&gcc GCC_USB0_BCR>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + qcom,select-utmi-as-pipe-clk; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; - usb_dwc: usb@8a00000 { - compatible = "snps,dwc3"; - reg = <0x08a00000 0xe000>; - clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "ref"; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phy-names = "usb2-phy"; - phys = <&usbphy0>; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - }; + status = "disabled"; }; intc: interrupt-controller@b000000 { -- 2.53.0 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy