[PATCH v6 5/8] riscv/runtime-const: Introduce runtime_const_mask_32()

K Prateek Nayak <[email protected]>
Newsgroups org.infradead.lists.linux-riscv,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-arch,org.kernel.vger.linux-kernel,org.kernel.vger.linux-s390
Message-ID <[email protected]>
Futex hash computation requires a mask operation with read-only after
init data that will be converted to a runtime constant in the subsequent
commit.

Introduce runtime_const_mask_32 to further optimize the mask operation
in the futex hash computation hot path. Since all the current use-cases
are of the form GENMASK(n, 0), with n > 0, following sequence:

  srli a0, a1, imm
  slli a0, a0, imm

is used for RISC-V where imm = (31 - width) to improve instruction
density and performance.

"The RISC-V Instruction Set Manual, Volume I - Unprivileged
Architecture" [1] Sec. 2.4.1 "Integer Register-Immediate Instructions"
notes the immediate shift for SRLI and SLLI are 5 bits wide starting at
bit #10. __runtime_fixup_shift() is reused to patch the immediate shifts
for the two instructions.

If a future use case arises that needs to tackle arbitrary mask,
consider using:

  lui   a0, 0x12346       # upper; +0x800 then >>12 for correct rounding
  addi  a0, a0, 0x678     # lower 12 bits

to patch the 32-bit mask in the asm block and return "__ret & (val)"
from runtime_const_mask_32() which allows compiler to further optimize
the logical and operation. __runtime_fixup_ptr() already patches a
lui + addi sequence which can be reused when the need arises.

A possible implementation for this alternate scheme can be found at [2].

Assisted-by: Claude:claude-sonnet-4-5
Suggested-by: Samuel Holland <[email protected]>
Suggested-by: Charlie Jenkins <[email protected]>
Link: https://docs.riscv.org/reference/isa/_attachments/riscv-unprivileged.pdf [1]
Link: https://lore.kernel.org/lkml/[email protected]/ [2]
Reviewed-by: Charlie Jenkins <[email protected]>
Tested-by: Charlie Jenkins <[email protected]>
Signed-off-by: Charlie Jenkins <[email protected]>
Signed-off-by: K Prateek Nayak <[email protected]>
---
changelog v5..v6:

o Picked up tags from charlie. (Thanks a ton!)

o Check the val before using __fls(). Flagged by Sashiko for potential
  compiler optimizations that can consider val !=0 after an __fls() call
  and then silently pass the BUG_ON().
---
 arch/riscv/include/asm/asm.h           |  1 +
 arch/riscv/include/asm/runtime-const.h | 44 ++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/arch/riscv/include/asm/asm.h b/arch/riscv/include/asm/asm.h
index e9e8ba83e632..b8bf842d4c13 100644
--- a/arch/riscv/include/asm/asm.h
+++ b/arch/riscv/include/asm/asm.h
@@ -34,6 +34,7 @@
 #define SZREG		__REG_SEL(8, 4)
 #define LGREG		__REG_SEL(3, 2)
 #define SRLI		__REG_SEL(srliw, srli)
+#define SLLI		__REG_SEL(slliw, slli)
 
 #if __SIZEOF_POINTER__ == 8
 #ifdef __ASSEMBLER__
diff --git a/arch/riscv/include/asm/runtime-const.h b/arch/riscv/include/asm/runtime-const.h
index 1ce02605d2e4..a472ebbf0971 100644
--- a/arch/riscv/include/asm/runtime-const.h
+++ b/arch/riscv/include/asm/runtime-const.h
@@ -159,6 +159,23 @@
 	__ret;							\
 })
 
+#define runtime_const_mask_32(val, sym)				\
+({								\
+	u32 __ret;						\
+	asm_inline(".option push\n\t"				\
+		".option norvc\n\t"				\
+		"1:\t"						\
+		SLLI " %[__ret],%[__val],12\n\t"		\
+		SRLI " %[__ret],%[__ret],12\n\t"		\
+		".option pop\n\t"				\
+		".pushsection runtime_mask_" #sym ",\"a\"\n\t"	\
+		".long 1b - .\n\t"				\
+		".popsection"					\
+		: [__ret] "=r" (__ret)				\
+		: [__val] "r" (val));				\
+	__ret;							\
+})
+
 #define runtime_const_init(type, sym) do {			\
 	extern s32 __start_runtime_##type##_##sym[];		\
 	extern s32 __stop_runtime_##type##_##sym[];		\
@@ -262,6 +279,33 @@ static inline void __runtime_fixup_shift(void *where, unsigned long val)
 	mutex_unlock(&text_mutex);
 }
 
+static inline void __runtime_fixup_mask(void *where, unsigned long val)
+{
+	unsigned int width = (val) ? __fls(val) + 1 : 0;
+
+	/*
+	 * XXX: Current implementation only supports patching masks of
+	 * form GENMASK(width, 0) (width >= 0) using a SRLI + SLLI
+	 * sequence instead of LUI + ADDI + AND sequence to improve
+	 * performance, density, and covers all the current use-cases.
+	 *
+	 * When the need arises to support any generic mask, and this
+	 * BUG_ON() is tripped, consider using a:
+	 *
+	 *   lui  %[__ret], #imm16
+	 *   addi %[__ret], #imm16
+	 *
+	 * sequence to load the 32bit const mask, and perform a logical
+	 * and outside the asm block before returning the result. Fixup
+	 * can simply reuse the existing __runtime_fixup_32() to patch
+	 * the LUI + ADDI sequence.
+	 */
+	BUG_ON(!val || width > 31 || (GENMASK(width - 1, 0) != val));
+
+	__runtime_fixup_shift(where, 32 - width);
+	__runtime_fixup_shift(where + 4, 32 - width);
+}
+
 static inline void runtime_const_fixup(void (*fn)(void *, unsigned long),
 				       unsigned long val, s32 *start, s32 *end)
 {
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.