Re: [PATCH] riscv: dts: spacemit: k3: fix IMSIC guest parameters

hi Guo,

On 07:41 Sun 16 Aug     , Guo Ren wrote:
> From: "GUO Ren (XuanTie)" <[email protected]>
> 
> The initial K3 device tree used generic/placeholder values for the
> IMSIC guest configuration:
> 
>   riscv,guest-index-bits = <6>;
>   riscv,num-guest-ids    = <511>;
> 
> According to the SpacemiT K3 User Manual [1] these values are
> incorrect for the X100 cores:
> 
>  - Hypervisor Extension: RVH 1.0, GEILEN = 8
>  - Advanced Interrupt Architecture (AIA):
>     - M-mode MSI: 512
>     - S-mode MSI: 512
>     - VS-mode MSI: 64
> 
> Therefore:
> 
> - S-mode IMSIC (simsic) only needs guest-index-bits = 3 (to cover
>   GEILEN = 8) and num-guest-ids = 63.
..
> - M-mode IMSIC (mimsic) does not implement guest interrupt files at
>   all, so the guest-related properties must be omitted.
> 
Cc Junhui

There is already one fix for IMSIC [1], but it's actually too late to
pick for v7.3 .. I'm not sure how best to handle this, would it possible
on your side to pick Junhui's patch and rework to combine them to 
send a V2? or I could pick his patch first ..

https://lore.kernel.org/all/[email protected]/ 

> Although the KVM AIA driver will re-detect the actual number of guest
> interrupt files via hgeie and correct guest-index-bits at runtime, the
> device tree should still describe the correct hardware parameters.
> 
> Update the device tree to match the silicon.
> 
..
> [1] https://www.spacemit.com/community/document/info?lang=en&nodepath=hardware/key_stone/k3/k3_docs/k3_usermanual/08_cpu.md
> 
no blank line and use "Link: https://.. [1]" format

> Fixes: 56f37e391a62 ("riscv: dts: spacemit: add initial support for K3 SoC")
> Cc: [email protected]
> Cc: Guodong Xu <[email protected]>
> Cc: Yixun Lan <[email protected]>
> Signed-off-by: GUO Ren (XuanTie) <[email protected]>
> ---
>  arch/riscv/boot/dts/spacemit/k3.dtsi | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
> index 19fc9b49668e..4120eb0c4083 100644
> --- a/arch/riscv/boot/dts/spacemit/k3.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
> @@ -1127,9 +1127,9 @@ simsic: interrupt-controller@e0400000 {
>  					      <&cpu4_intc 9>, <&cpu5_intc 9>,
>  					      <&cpu6_intc 9>, <&cpu7_intc 9>;
>  			msi-controller;
> -			riscv,guest-index-bits = <6>;
> +			riscv,guest-index-bits = <3>;
>  			riscv,hart-index-bits = <4>;
> -			riscv,num-guest-ids = <511>;
> +			riscv,num-guest-ids = <63>;
>  			riscv,num-ids = <511>;
>  		};
>  
> @@ -1168,9 +1168,7 @@ mimsic: interrupt-controller@f1000000 {
>  					      <&cpu4_intc 11>, <&cpu5_intc 11>,
>  					      <&cpu6_intc 11>, <&cpu7_intc 11>;
>  			msi-controller;
> -			riscv,guest-index-bits = <6>;
>  			riscv,hart-index-bits = <4>;
> -			riscv,num-guest-ids = <511>;
>  			riscv,num-ids = <511>;
>  			status = "reserved";
>  		};
> -- 
> 2.43.0
> 

-- 
Yixun Lan (dlan)

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv