[PATCH v5 06/12] arm64: dts: rockchip: rk3588s-nanopi-r6: remove always-on and boot-on from vdd_npu_s0 reg
Joachim Eastwood via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.linux-rockchip,org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
From: Joachim Eastwood <[email protected]> Since the NPU is hooked up in DT, the always-on and boot-on properties on the regulator isn't needed anymore. Signed-off-by: Joachim Eastwood <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index b120dd98241f..8953dcebb93e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -314,8 +314,6 @@ vdd_npu_s0: regulator@42 { regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <2300>; - regulator-boot-on; - regulator-always-on; vin-supply = <&vcc5v0_sys>; regulator-state-mem { -- 2.55.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip