[PATCH v5 08/12] arm64: dts: rockchip: rk3588s-nanopi-r6: add gmac1 phy-supply
Joachim Eastwood via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.linux-rockchip,org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
From: Joachim Eastwood <[email protected]> The RTL8211F Ethernet phy is powered from the VCC_3V3_S3 rail. Signed-off-by: Joachim Eastwood <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index 50af092f9cfa..206cc88fdaa1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -210,6 +210,7 @@ &gmac1 { clock_in_out = "output"; phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-rxid"; + phy-supply = <&vcc_3v3_s3>; pinctrl-0 = <&gmac1_miim &gmac1_tx_bus2 &gmac1_rx_bus2 -- 2.55.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip