[PATCH v5 10/12] arm64: dts: rockchip: rk3588s-nanopi-r6: add comment about gmac phy-mode
Joachim Eastwood via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.linux-rockchip,org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
From: Joachim Eastwood <[email protected]> Add comment to explain rgmii-rxid phy-mode usage. Note that the actual delay in ns is not known. The tx_delay value of 0x42 comes from vendor DT. Signed-off-by: Joachim Eastwood <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi index 5a42e7dadc92..94f218a48078 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -199,7 +199,7 @@ &cpu_l3 { &gmac1 { clock_in_out = "output"; phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-rxid"; /* Vendor provided tx delay value below */ phy-supply = <&vcc_3v3_s3>; pinctrl-0 = <&gmac1_miim &gmac1_tx_bus2 -- 2.55.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip