Re: [PATCH v5 0/2] arm64: dts: rockchip: Add ArmSoM CM5 and CM5-IO
Heiko Stuebner <[email protected]>
| Newsgroups | org.infradead.lists.linux-rockchip,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Sun, 19 Jul 2026 15:46:09 +1200, Jiaxing Hu wrote:
> Add mainline support for the ArmSoM CM5, an RK3576 compute module, and
> its CM5-IO carrier board.
>
> Patch 1 adds the binding, patch 2 the module dtsi and the carrier dts.
>
> The on-module YT8531 PHY has no crystal and takes its 25 MHz reference
> from the SoC. Following review of v4, the reference is now handled the
> way Andrew Lunn and Maxime Chevallier asked for: the PHY is the consumer
> and enables the clock itself. That needs a small motorcomm change sent
> to netdev [1]; the clock is optional so this DTS still applies without
> it. The earlier dwmac-rk MAC-side patch is dropped.
>
> [...]
Applied, thanks!
[1/2] dt-bindings: arm: rockchip: Add ArmSoM CM5 and CM5-IO
commit: f60f44c24b10fe7fd1fa76b360646def1bea193a
[2/2] arm64: dts: rockchip: Add ArmSoM CM5 and CM5-IO
commit: 44a48a23974b86d2c551afbabee15ad70b249df5
Adapted the styling a bit, fixed some dt-checker warnings including the
2nd ethernet-phy compatible - I left the most specific one.
Best regards,
--
Heiko Stuebner <[email protected]>
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip