[PATCH v3 1/4] pinctrl: rockchip: Decode drive strength in the get function

The decoding of the 2-bit and 8-bit level drive-strength values sits in
rockchip_set_drive_perpin(), where it is unreachable: the SoCs whose
banks declare these drive types (RK3506 and RV1103B) take the early
ctrl->type branch in the set path, and the read-and-decode logic in a
set function has no purpose. Meanwhile rockchip_get_drive_perpin()
lacks the decoding, so pin_config_get() and the debugfs output report
-EINVAL for these SoCs.

Move the two cases to rockchip_get_drive_perpin(), where they belong.

Fixes: dbd2317d7b9f ("pinctrl: rockchip: Add rk3506 pinctrl support")
Signed-off-by: Simon Glass <[email protected]>
---

Changes in v3:
- Add new patch moving the drive-strength decoding to the get function

 drivers/pinctrl/pinctrl-rockchip.c | 38 +++++++++++++++---------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 7e0fcd45fd26..08a46a04a815 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -3267,6 +3267,25 @@ static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank,
 	case DRV_TYPE_IO_1V8_ONLY:
 		rmask_bits = RK3288_DRV_BITS_PER_PIN;
 		break;
+	case DRV_TYPE_IO_LEVEL_2_BIT:
+		ret = regmap_read(regmap, reg, &data);
+		if (ret)
+			return ret;
+		data >>= bit;
+
+		return data & 0x3;
+	case DRV_TYPE_IO_LEVEL_8_BIT:
+		ret = regmap_read(regmap, reg, &data);
+		if (ret)
+			return ret;
+		data >>= bit;
+		data &= (1 << 8) - 1;
+
+		ret = hweight8(data);
+		if (ret > 0)
+			return ret - 1;
+		else
+			return -EINVAL;
 	default:
 		dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
 		return -EINVAL;
@@ -3390,25 +3409,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
 	case DRV_TYPE_IO_1V8_ONLY:
 		rmask_bits = RK3288_DRV_BITS_PER_PIN;
 		break;
-	case DRV_TYPE_IO_LEVEL_2_BIT:
-		ret = regmap_read(regmap, reg, &data);
-		if (ret)
-			return ret;
-		data >>= bit;
-
-		return data & 0x3;
-	case DRV_TYPE_IO_LEVEL_8_BIT:
-		ret = regmap_read(regmap, reg, &data);
-		if (ret)
-			return ret;
-		data >>= bit;
-		data &= (1 << 8) - 1;
-
-		ret = hweight8(data);
-		if (ret > 0)
-			return ret - 1;
-		else
-			return -EINVAL;
 	default:
 		dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
 		return -EINVAL;
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip