[PATCH 17/21] arm64: dts: allwinner: h616: add ACx00 EPHY resources

Expose logical SID cells for the AC200/AC300 EPHY calibration, the combined
companion-variant and AC300-calibration-range configuration, and the AC200
bandgap fields.

Also describe the PA10/PA11 I2C3 pin group used by the AC200 control
interface.

Signed-off-by: James Hilliard <[email protected]>
---
 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 6879f27c2b2b..2cedda6e87a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -252,6 +252,20 @@ ths_calibration: thermal-sensor-calibration@14 {
 			cpu_speed_grade: cpu-speed-grade@0 {
 				reg = <0x0 2>;
 			};
+
+			ephy_calibration: ethernet-phy-calibration@2c,0 {
+				reg = <0x2c 1>;
+				bits = <0 4>;
+			};
+
+			ephy_config: ethernet-phy-configuration@2c {
+				reg = <0x2c 2>;
+				bits = <8 2>;
+			};
+
+			ac200_bandgap: bandgap@30 {
+				reg = <0x30 2>;
+			};
 		};
 
 		timer0: timer@3009000 {
@@ -324,6 +338,13 @@ i2c0_pins: i2c0-pins {
 				function = "i2c0";
 			};
 
+			/omit-if-no-ref/
+			i2c3_pa_pins: i2c3-pa-pins {
+				pins = "PA10", "PA11";
+				function = "i2c3";
+				bias-pull-up;
+			};
+
 			i2c3_ph_pins: i2c3-ph-pins {
 				pins = "PH4", "PH5";
 				function = "i2c3";

-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip