Re: [PATCH v5 05/10] phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes

On Thu, Jul 23, 2026 at 10:41:48PM +0300, Cristian Ciocaltea wrote:
> Any changes to the PHY link rate and/or color depth done via the HDMI
> PHY configuration API are not immediately programmed into the hardware,
> but are delayed until the PHY usage count gets incremented from 0 to 1,
> that is when it is powered on or when the PLL clock exposed through
> the CCF API is prepared, whichever comes first.
> 
> Since the clock might remain in prepared state after subsequent PHY
> config changes, the programming can also be triggered via
> clk_ops.set_rate().  However, from the clock consumer perspective (i.e.
> VOP2 display controller), the (pixel) clock rate doesn't vary with bpc,
> as that is handled internally by the PHY and reflected in the TDMS
> character rate only.
> 
> As a consequence, changing the bpc while preserving the modeline may
> lead to out-of-sync issues between CCF and HDMI PHY config state,
> because the .set_rate() callback is not invoked when clock rate remains
> constant.  This may also happen when the PHY PLL has been pre-programmed
> by an external entity, e.g. the bootloader, which is actually a
> regression introduced by the recent FRL patches.

Don't mention 'patches' in description. Once the patch gets merged, it becomes a
commit. If needed, reference the offending commit(s) directly.

> 
> Introduce a pll_config_dirty flag to keep track of uncommitted PHY
> config changes and use it in clk_ops.determine_rate() to invalidate the
> current clock rate (as known by CCF) and, consequently, ensure those
> changes are programmed into hardware via clk_ops.set_rate().
> 
> Moreover, proceed with a similar fix in phy_ops.power_on() callback, to
> handle the scenario where the CCF API is not used due to operating in
> FRL mode, while the clock is still in a prepared state and thus
> preventing rk_hdptx_phy_consumer_get() to apply the updated PHY
> configuration.
> 
> Fixes: de5dba833118 ("phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support")
> Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management")
> Tested-by: Thomas Niederprüm <[email protected]>
> Tested-by: Simon Wright <[email protected]>
> Tested-by: Diederik de Haas <[email protected]>  # NanoPC-T6 LTS
> Reviewed-by: Andy Yan <[email protected]>
> Signed-off-by: Cristian Ciocaltea <[email protected]>

Reviewed-by: Manivannan Sadhasivam <[email protected]>

- Mani

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip