[PATCH v14 11/38] phy: rockchip: usbdp: Support single-lane DP

From: Zhang Yubing <[email protected]>

Implement support for using just a single DisplayPort line.

Signed-off-by: Zhang Yubing <[email protected]>
Tested-by: Igor Paunovic <[email protected]> # Orange Pi 5 Plus
Signed-off-by: Sebastian Reichel <[email protected]>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 64 +++++++++++++------------------
 1 file changed, 27 insertions(+), 37 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 7540c897dde1..c4d62b234ea8 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -193,6 +193,7 @@ struct rk_udphy {
 	int id;
 
 	bool dp_in_use;
+	int dp_lanes;
 
 	/* PHY const config */
 	const struct rk_udphy_cfg *cfgs;
@@ -535,6 +536,13 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
  * <0 1>                  dpln0         dpln1       usbrx         usbtx
  * <2 3>                  usbrx         usbtx       dpln0         dpln1
  * ---------------------------------------------------------------------------
+ * if 1 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = <x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ *                        B11-B10       A2-A3       A11-A10       B2-B3
+ * rockchip,dp-lane-mux   ln0(tx/rx)    ln1(tx)     ln2(tx/rx)    ln3(tx)
+ * <0>                    dpln0         \           usbrx         usbtx
+ * ---------------------------------------------------------------------------
  */
 
 static void rk_udphy_dplane_select(struct rk_udphy *udphy)
@@ -542,18 +550,18 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	u32 value = 0;
 
-	switch (udphy->mode) {
-	case UDPHY_MODE_DP:
-		value |= 2 << udphy->dp_lane_sel[2] * 2;
+	switch (udphy->dp_lanes) {
+	case 4:
 		value |= 3 << udphy->dp_lane_sel[3] * 2;
+		value |= 2 << udphy->dp_lane_sel[2] * 2;
 		fallthrough;
 
-	case UDPHY_MODE_DP_USB:
-		value |= 0 << udphy->dp_lane_sel[0] * 2;
+	case 2:
 		value |= 1 << udphy->dp_lane_sel[1] * 2;
-		break;
+		fallthrough;
 
-	case UDPHY_MODE_USB:
+	case 1:
+		value |= 0 << udphy->dp_lane_sel[0] * 2;
 		break;
 
 	default:
@@ -566,28 +574,6 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
 		     FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
 }
 
-static int rk_udphy_dplane_get(struct rk_udphy *udphy)
-{
-	int dp_lanes;
-
-	switch (udphy->mode) {
-	case UDPHY_MODE_DP:
-		dp_lanes = 4;
-		break;
-
-	case UDPHY_MODE_DP_USB:
-		dp_lanes = 2;
-		break;
-
-	case UDPHY_MODE_USB:
-	default:
-		dp_lanes = 0;
-		break;
-	}
-
-	return dp_lanes;
-}
-
 static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
 {
 	u32 val = 0;
@@ -657,6 +643,7 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 	}
 
 	rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
+	udphy->dp_lanes = 2;
 }
 
 static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -895,7 +882,7 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
 		return 0;
 	}
 
-	if (num_lanes != 2 && num_lanes != 4)
+	if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4)
 		return dev_err_probe(udphy->dev, -EINVAL,
 				     "invalid number of lane mux\n");
 
@@ -921,9 +908,11 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
 	}
 
 	udphy->mode = UDPHY_MODE_DP;
-	if (num_lanes == 2) {
+	udphy->dp_lanes = num_lanes;
+	if (num_lanes == 1 || num_lanes == 2) {
 		udphy->mode |= UDPHY_MODE_USB;
-		udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP);
+		udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP) ||
+			      (udphy->lane_mux_sel[1] == PHY_LANE_MUX_DP);
 	}
 
 	return 0;
@@ -1050,18 +1039,17 @@ static int rk_udphy_dp_phy_exit(struct phy *phy)
 static int rk_udphy_dp_phy_power_on(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
-	int ret, dp_lanes;
+	int ret;
 
 	mutex_lock(&udphy->mutex);
 
-	dp_lanes = rk_udphy_dplane_get(udphy);
-	phy_set_bus_width(phy, dp_lanes);
+	phy_set_bus_width(phy, udphy->dp_lanes);
 
 	ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
 	if (ret)
 		goto unlock;
 
-	rk_udphy_dplane_enable(udphy, dp_lanes);
+	rk_udphy_dplane_enable(udphy, udphy->dp_lanes);
 
 	rk_udphy_dplane_select(udphy);
 
@@ -1341,6 +1329,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
 		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
 		mode = UDPHY_MODE_DP;
+		udphy->dp_lanes = 4;
 		break;
 
 	case TYPEC_DP_STATE_D:
@@ -1357,6 +1346,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 			udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
 		}
 		mode = UDPHY_MODE_DP_USB;
+		udphy->dp_lanes = 2;
 		break;
 	}
 
@@ -1501,7 +1491,7 @@ static int rk_udphy_probe(struct platform_device *pdev)
 		ret = PTR_ERR(udphy->phy_dp);
 		return dev_err_probe(dev, ret, "failed to create DP phy\n");
 	}
-	phy_set_bus_width(udphy->phy_dp, rk_udphy_dplane_get(udphy));
+	phy_set_bus_width(udphy->phy_dp, udphy->dp_lanes);
 	udphy->phy_dp->attrs.max_link_rate = 8100;
 	phy_set_drvdata(udphy->phy_dp, udphy);
 

-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip