[PATCH v2 0/2] arm64: dts: rockchip: Add Radxa E54C

This series requires the following commit in Linux v7.2 to make the
switch work: https://github.com/torvalds/linux/commit/9da2c8672f77

There was a conflict between eMMC and SPI Flash, so the unmounted
eMMC was disabled. The schematic can be found below:
https://dl.radxa.com/e/e54c/hw/radxa_e54c_v1.2_schematic.pdf

The following functions were tested:
- Boot from SD card using generic-rk3588 u-boot
- USB Type-C connection to RTL8153 network card
- USB Type-C connection to USB 3.0 drive
- 2x USB 2.0 and 1x USB 3.0 Type-A HOST
- RTL8367RB 4-Port Gigabit Switch
- HDMI 1080P Output
- Button and LED
- PCIe NVMe SSD

Changes in v2:
  Collect Reviewed-by
  Fix adc button voltage
  Add domain-supply to NPU
  Update phy-mode for switch

Chukun Pan (2):
  dt-bindings: arm: rockchip: Add Radxa E54C
  arm64: dts: rockchip: Add Radxa E54C

 .../devicetree/bindings/arm/rockchip.yaml     |    6 +-
 arch/arm64/boot/dts/rockchip/Makefile         |    1 +
 .../boot/dts/rockchip/rk3582-radxa-e54c.dts   | 1184 +++++++++++++++++
 3 files changed, 1189 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3582-radxa-e54c.dts

-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip