[wireless-regdb] wireless-regdb: Regulatory rules for Hong Kong (HK)

"tavio.wong" <[email protected]>
Newsgroups org.infradead.lists.wireless-regdb
Message-ID <oiVeDD95tMcpWN4ynhZfWbX0idjaGq3ibft2obzq-RSMVptQ3TncwBf_kcekWctED_IGNRx3BmIACchzsrEcSwH1tcfr3jMRP2S1egcTCpY=@proton.me>
Hello,

According to section 2.1(b) of [1], the allowed peak output power in different bands is higher than currently defined in db.txt. I see that the rules for HK have not been updated since 2014. Since I don't understand sections 2.2 and 2.3, is there any reason for limiting the output power other than that the information is outdated?

If not, I propose the rules for HK be updated as follows [section 2.1(a) also requires that 5.15-5.35 GHz be restricted to indoor use]:

country HK: DFS-ETSI
	(2402 - 2482 @ 40), (36)
	(5170 - 5250 @ 80), (23), AUTO-BW, NO-OUTDOOR
	(5250 - 5330 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR
	(5490 - 5710 @ 160), (30), DFS
	(5735 - 5835 @ 80), (36)

Thank you for your consideration.

[1] https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1039.pdf

[2] https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/tree/db.txt?id=7f7a9f7bc6011b072b5427eced1ff19261764e95#n751

Best regards,
Tavio

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.