Re: WiF Transmit Power Control (TPC) Regulatory Requirements?

Petko Bordjukov <[email protected]>
Newsgroups org.infradead.lists.wireless-regdb,org.kernel.vger.linux-wireless
Message-ID <CAAgmp6t_emZ1GSnh56JuO9Cp=dJcf13rOCN=KdGMXG10nxBoEA@mail.gmail.com>
On Thu, Jan 4, 2024 at 12:02 PM <[email protected]> wrote:
>
> Ideally, TPC should be a fully automatic mechanism that reduces
> transmit power between the two points to as low of a level as possible
> while delivering the same quality of service. The purpose is to reduce
> the excess headroom in each link. I.e., if you could still link with
> 65Mb/s towards a given direction using 14dBmW, you should not transmit
> with 20dBmW.

Just to add to that, that for most if not all of the EU it must also
'provide on average, a mitigation factor of at least 3 dB on the
maximum permitted output power of the systems'. I read this (not a
lawyer or radio engineer, so please correct me if I'm wrong) as the
average e.i.r.p. of the entire BSS must at any point in time not
exceed the maximum allowed - 3db. This would include AP->STA, STA->AP,
and STA->STA transmissions.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.