Re: [PATCH 1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022

Chen-Yu Tsai <[email protected]>
Newsgroups org.infradead.lists.wireless-regdb,org.kernel.vger.linux-wireless
Message-ID <CAGb2v67hWYHebORsjHuOw2mA+mwpmoCUF4vhAHE7Xt81VvZrtQ@mail.gmail.com>
On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <[email protected]> wrote:
>
> From: Ping-Ke Shih <[email protected]>
>
> Radiocommunications Regulations (General User Radio Licence for Short Range
> Devices) Notice 2022 listed spectrum:
>
> 2400.0000 - 2483.5000
>   * e.i.r.p. 0 dBW (1 W)

13. Transmitters using e.i.r.p. greater than 0 dBW (1 W) must employ
    frequency hopping or digital modulation techniques.

AFAIK WiFi uses digital modulation techniques. So this could be
raised up to 6 dBW?

> 5150.0000 - 5350.0000
>  * the maximum power is 0 dBW (1 W) e.i.r.p. and
>    the maximum permitted power spectral density is -13 dBW/MHz
>    (17 dBm/Hz, 50 mW/MHz) e.i.r.p.
>  * 5250 - 5350 MHz, If Transmitter Power Control is not used, then the
>    maximum power (e.i.r.p.) value shall be reduced by 3 dB.
>
> 5470.0000 - 5725.0000
>  * 5470 - 5725 MHz, transmitter peak power must not exceed -6 dBW (250 mW)
>    If Transmitter Power Control is not used, then the maximum power
>    (e.i.r.p.) value must be reduced by 3 dB.

We use e.i.r.p. value in the database. The limit is 1W, then minus 3 dB
due to lack of TPC.

> 5725.0000 - 5850.0000
>  * 5725 - 5850 MHz, the transmitter peak power must not exceed 0 dBW (1 W)
>    and the power spectral density must not exceed 17 dBm/MHz.

13. Transmitters using e.i.r.p. greater than 0 dBW (1 W) must employ
    frequency hopping or digital modulation techniques.

AFAIK WiFi uses digital modulation techniques. So this could be
raised up to 6 dBW?


Thanks
ChenYu

> 5925.0000 - 6425.0000
>  * the maximum power is -6 dBW (24 dBm, 250 mW ) e.i.r.p. and
>    the maximum permitted power spectral density is -19 dBW/MHz
>    (11 dBm/MHz, 12.6 mW/MHz) e.i.r.p. for low power devices.
>    Only be used indoors.
>  * the maximum power is -16 dBW (14 dBm, 25 mW ) e.i.r.p. and
>    the maximum permitted power spectral density is -29 dBW/MHz
>    (1 dBm/MHz, 1.26 mW/MHz) e.i.r.p. for very low power devices.
>    Very Low Power applications.
>
> 57000.0000 - 71000.0000
>  * for devices transmitting at 10 dBW e.i.r.p or less,
>    the power spectral density must not exceed -7 dBW/MHz e.i.r.p. and
>    the maximum transmit power must not exceed -3 dBW at the antenna port
>    or ports.
>  * for devices transmitting greater than 10 dBW e.i.r.p., the power
>    spectral density shall not exceed 8 dBW/MHz e.i.r.p and antennas with
>    a gain greater than 30 dBi shall be used.
>
> [1] https://gazette.govt.nz/notice/id/2022-go3100
>
> Signed-off-by: Ping-Ke Shih <[email protected]>
> ---
>  db.txt | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/db.txt b/db.txt
> index d7592c299c62..266ba2d48731 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -1416,12 +1416,16 @@ country NP: DFS-JP
>         (5250 - 5330 @ 80), (20), DFS, AUTO-BW
>         (5735 - 5835 @ 80), (20)
>
> +# Source:
> +# https://gazette.govt.nz/notice/id/2022-go3100
>  country NZ: DFS-ETSI
> -       (2402 - 2482 @ 40), (30)
> -       (5170 - 5250 @ 80), (17), AUTO-BW
> -       (5250 - 5330 @ 80), (24), DFS, AUTO-BW
> -       (5490 - 5730 @ 160), (24), DFS
> -       (5735 - 5835 @ 80), (30)
> +       (2400 - 2483.5 @ 40), (30)
> +       (5150 - 5250 @ 80), (30), AUTO-BW
> +       (5250 - 5350 @ 80), (27), DFS, AUTO-BW
> +       (5470 - 5730 @ 160), (21), DFS
> +       (5725 - 5850 @ 80), (30)
> +       (5925 - 6425 @ 320), (24), NO-OUTDOOR
> +       (57000 - 71000 @ 2160), (40)
>
>  country OM: DFS-ETSI
>         (2402 - 2482 @ 40), (20)
> --
> 2.25.1
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.