wireless-regdb: Missing 5470-5725 MHz WAS/RLAN band for Georgia (GE)?

Hello,

Sorry, I forgot to CC the wireless-regdb list on my previous message.

I noticed that the current wireless-regdb entry for Georgia (GE) does not
include the 5470-5725 MHz WAS/RLAN band.

According to the Georgian Communications Commission frequency plan, Georgia
allows WAS/RLAN operation in 5470-5725 MHz with 1 W averaged EIRP, subject
to mitigation requirements based on EN 301 893, including DFS/TPC
requirements. The document also notes that if TPC is not used, the EIRP
limits should be reduced by 3 dB.

Official source:

Georgian Communications Commission, National Frequency Plan / Frequency
Allocation Table:
https://comcom.ge/uploads/other/14/14075.pdf

Relevant entries in the document:

- 5150-5350 MHz: WAS/RLAN, 200 mW averaged EIRP, indoor only
- 5470-5725 MHz: WAS/RLAN, 1 W averaged EIRP
- 5945-6425 MHz: RLAN, 200 mW averaged EIRP

The notes for 5250-5350 MHz and 5470-5725 MHz reference EN 301 893
mitigation requirements and TPC, with a 3 dB EIRP reduction if TPC is not
used.

Would the following update for GE be appropriate?

diff --git a/db.txt b/db.txt
--- a/db.txt
+++ b/db.txt
@@
 =C2=A0country GE: DFS-ETSI
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (2402 - 2482 @ 40), (20)
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (5170 - 5250 @ 80), (18), AUTO-BW
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (5250 - 5330 @ 80), (18), DFS, AUTO-BW
+=C2=A0 =C2=A0 =C2=A0 =C2=A0(5470 - 5725 @ 160), (27), DFS
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (5945 - 6425 @ 320), (23), NO-OUTDOOR
 =C2=A0 =C2=A0 =C2=A0 =C2=A0 (57000 - 66000 @ 2160), (40)

I used 27 dBm here because the official document lists 1 W EIRP with TPC,
and says that the limit should be reduced by 3 dB if TPC is not used.
Please let me know if a different representation would be preferred.

Thanks,
ekze