Re: wireless-regdb: Update regulatory rules for Hong Kong (HK) on 5GHz and 6GHz

Morgan Wong <[email protected]>
Newsgroups org.infradead.lists.wireless-regdb,org.kernel.vger.linux-wireless
Message-ID <CABzKGg3SeW+vUzyZ5Bq1cUoN2YGHo2vuBY3vuqLoa2dc9buMGQ@mail.gmail.com>
Dear all,

Please keep the original value 24dbm instead of 23 in 6GHz.

I overlooked there was a small footnote at the bottom of document HKCA
1081. The government allows +1dmb on top of ETSI's 23dmb = 24dbm

https://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/commit/?id=756d784aa2ee2810ded0dd314d9764c80660a75b

Morgan Wong <[email protected]> 於 2026年8月3日週一 下午9:37寫道:
>
> Dear all,
>
> Currently:
>
> # Source:
> # https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1039.pdf
> (2.4 GHz and 5 GHz)
> # https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1081.pdf (6 GHz)
> country HK: DFS-ETSI
> (2400 - 2483.5 @ 40), (36)
> (5150 - 5250 @ 80), (23), AUTO-BW, NO-OUTDOOR
> (5250 - 5350 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR
> (5470 - 5730 @ 160), (27), DFS
> (5730 - 5850 @ 80), (36)
> (5945 - 6425 @ 160), (24), NO-OUTDOOR
>
>
>
> Update :
>
> # Source:
> # https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1039.pdf
> (2.4 GHz and 5 GHz)
> # https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-15/subpart-E
> (2.4 GHz and 5 GHz)
> # https://www.etsi.org/deliver/etsi_en/301800_301899/301893/02.00.07_20/en_301893v020007a.pdf
> (2.4 GHz and 5 GHz)
> # https://www.ofca.gov.hk/filemanager/ofca/en/content_401/hkca1081.pdf (6 GHz)
> # https://www.etsi.org/deliver/etsi_en/303600_303699/303687/01.00.00_20/en_303687v010000a.pdf
> (6GHz)
> country HK: DFS-ETSI
> (2400 - 2483.5 @ 40), (36)
> (5150 - 5250 @ 80), (23), AUTO-BW, NO-OUTDOOR
> (5250 - 5350 @ 80), (23), DFS, AUTO-BW, NO-OUTDOOR
> (5470 - 5730 @ 160), (30), DFS
> (5730 - 5850 @ 80), (36)
> (5945 - 6425 @ 320), (23), NO-OUTDOOR
>
> Reason for change in 5470-5730 :
> The HK department, OFCA has its own requirement, 30dbm in addition to
> EITHER fulfilling FCC OR ETSI requirement. The rationale behind is
> having the biggest tolerance among major world standards to be an
> international city. The OFCA, 30dbm is the baseline value to be
> fulfilled in the highest priority.
>
> About FCC
> 27dbm (500mW) without TPC, 30dbm (1W) with TPC
> # https://www.ecfr.gov/current/title-47/part-15/subpart-E#p-15.407(h)(1)
>
> About UTSI (same as FCC)
> 27dbm (500mW) without TPC, 30dbm (1W) with TPC
> # https://www.etsi.org/deliver/etsi_en/301800_301899/301893/02.00.07_20/en_301893v020007a.pdf
> (page 17)
>
> A TPC (30dbm), 802.11h edition should be taken instead of 27dbm as I suggest.
> Or a TPC regulation flag may be a good idea to bind with 30dbm together.
>
>
> Reason for change in  5945 - 6425 :
> The HK department, OFCA requires to have its own EIPR limit, 24dbm in
> addition to ETSI 23dbm.
> Therefore, the smaller value should be taken.
> (6GHz in HK requires no reference to FCC standards, unlike 5GHz situation)
> WIFI 7 allows 320MHz, the previous value, 160MHz was in wifi 6E era.
>
> # https://www.etsi.org/deliver/etsi_en/303600_303699/303687/01.00.00_20/en_303687v010000a.pdf
> (page 17)
>
>
> --
> Regards,
>
> Morgan Wong



-- 
Regards,

Morgan Wong
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.