[PATCH 0/2] PM8350B LDO support
Esteban Urrutia <[email protected]>
| Newsgroups | org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.phone-devel |
|---|---|
| Message-ID | <[email protected]> |
The PM8350B PMIC has an LDO regulator which seems to be mostly used for powering display driver ICs. On my device's schematics, vdd-l1-supply is represented as VIN_DDIC, and vdd-l1 is represented as VREG_DDIC. Downstream this LDO is of type pmic5-ldo and I assume it should be of type pmic5_nldo upstream, since this is the type of regulator with the least margin error for the reference voltage, which is 1250-1296mV for my device. Signed-off-by: Esteban Urrutia <[email protected]> --- Esteban Urrutia (2): regulator: dt-bindings: qcom,rpmh: Add support for PM8350B regulator: qcom-rpmh: Add support for PM8350B .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml | 11 +++++++++++ drivers/regulator/qcom-rpmh-regulator.c | 9 +++++++++ 2 files changed, 20 insertions(+) --- base-commit: b4515cf4156356e8f4fe6e0fdc17f59adab9772f change-id: 20260723-pm8350b-ldo-7822bafd6e5c Best regards, -- Esteban Urrutia <[email protected]>