[PATCH 11/28] arm64: dts: qcom: qcs8550-aim300: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies

The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.

Fix it by swapping the two supplies back.

Fixes: 0b12da4e28d8 ("arm64: dts: qcom: add base AIM300 dtsi")
Reported-by: Konrad Dybcio <[email protected]>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index e6ebb643203b..ae301d78e071 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -412,8 +412,8 @@ &usb_1_hsphy {
 };
 
 &usb_dp_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l3f_0p88>;
+	vdda-phy-supply = <&vreg_l3f_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
 };
 
 &xo_board {

-- 
2.43.0