[PATCH 26/28] arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies

The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
UFS QMP PHY on this SoC. But these two supplies are swapped for the USB
QMP PHY on this board, feeding 1.15V to vdda-phy and 0.72V to vdda-pll.

Fix it by swapping the two supplies back.

Fixes: 49dab7311f57 ("arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support")
Reported-by: Konrad Dybcio <[email protected]>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
 arch/arm64/boot/dts/qcom/eliza-mtp.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/eliza-mtp.dts b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
index 1374afd9d14e..9d58ef20213a 100644
--- a/arch/arm64/boot/dts/qcom/eliza-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
@@ -535,8 +535,8 @@ &usb {
 };
 
 &usb_dp_qmpphy {
-	vdda-phy-supply = <&vreg_l3g>;
-	vdda-pll-supply = <&vreg_l7k>;
+	vdda-phy-supply = <&vreg_l7k>;
+	vdda-pll-supply = <&vreg_l3g>;
 
 	status = "okay";
 };

-- 
2.43.0