[PATCH v4 2/2] clk: qcom: Add LPASS VA CSR heartbeat pulse clock

The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
start of the DMAs and Codec Interfaces for the audio usecases and
can serve as a periodic wakeup source for the DSP.

Add the LPASS VA CSR driver that models the rate generator as a clock
provider so it is enabled and disabled automatically alongside the
other clocks during runtime PM resume and suspend.

Signed-off-by: Sarath Ganapathiraju <[email protected]>
---
 drivers/clk/qcom/Kconfig        |  12 ++++
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/lpass-va-csr.c | 148 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d1fc9bf87126..d9a4ceb1d3a0 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -2040,6 +2040,18 @@ config CLK_GFM_LPASS_SM8250
 	  Support for the Glitch Free Mux (GFM) Low power audio
           subsystem (LPASS) clocks found on SM8250 SoCs.
 
+config QCOM_CLK_LPASS_HEARTBEAT_PULSE
+	tristate "Qualcomm LPASS VA CSR heartbeat pulse clock provider"
+	depends on COMMON_CLK
+	select REGMAP_MMIO
+	help
+	  Qualcomm LPASS VA CSR block contains the rate generator hardware
+	  that produces the HeartBeat Pulse (also known as RateGen Pulse).
+	  This driver models the rate generator as a clock provider so
+	  that consumers can enable or disable it via the common clock
+	  framework, and it can be used to synchronize the start of DMAs
+	  and Codec Interfaces or as a periodic wakeup source for the DSP.
+
 config SM_VIDEOCC_8450
 	tristate "SM8450 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index daf25d583be2..8d3e3381bc29 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_CLK_ELIZA_DISPCC) += dispcc-eliza.o
 obj-$(CONFIG_CLK_ELIZA_GCC) += gcc-eliza.o
 obj-$(CONFIG_CLK_ELIZA_TCSRCC) += tcsrcc-eliza.o
 obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
+obj-$(CONFIG_QCOM_CLK_LPASS_HEARTBEAT_PULSE) += lpass-va-csr.o
 obj-$(CONFIG_CLK_GLYMUR_CAMCC) += camcc-glymur.o
 obj-$(CONFIG_CLK_GLYMUR_DISPCC) += dispcc-glymur.o
 obj-$(CONFIG_CLK_GLYMUR_EVACC) += evacc-glymur.o
diff --git a/drivers/clk/qcom/lpass-va-csr.c b/drivers/clk/qcom/lpass-va-csr.c
new file mode 100644
index 000000000000..2e692407a966
--- /dev/null
+++ b/drivers/clk/qcom/lpass-va-csr.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_clk.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/pm_runtime.h>
+
+#define LPASS_RATE_GEN_CTRL		0xd000
+#define LPASS_RATE_GEN_COUNTER_0	0xd004
+#define LPASS_RATE_GEN_DELAY		0xd010
+
+#define LPASS_RATE_GEN_MAX_REG		LPASS_RATE_GEN_DELAY
+
+#define LPASS_RG_CTRL_EN		BIT(0)
+
+struct lpass_va_csr_data {
+	u32 counter_0;
+	u32 delay;
+};
+
+static const struct lpass_va_csr_data hawi_csr_data = {
+	.counter_0 = 0x960,
+	.delay = 0x16,
+};
+
+static const struct regmap_config lpass_rate_gen_regmap_config = {
+	.name = "lpass_rate_gen",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = LPASS_RATE_GEN_MAX_REG,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+struct lpass_va_csr {
+	struct regmap *regmap;
+	const struct lpass_va_csr_data *data;
+	struct clk_hw hb_hw;
+};
+
+#define to_lpass_va_csr(_hw) container_of(_hw, struct lpass_va_csr, hb_hw)
+
+static int heartbeat_pulse_prepare(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+	int ret;
+
+	ret = regmap_write(csr->regmap, LPASS_RATE_GEN_COUNTER_0, csr->data->counter_0);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(csr->regmap, LPASS_RATE_GEN_DELAY, csr->data->delay);
+	if (ret)
+		return ret;
+
+	return regmap_set_bits(csr->regmap, LPASS_RATE_GEN_CTRL, LPASS_RG_CTRL_EN);
+}
+
+static void heartbeat_pulse_unprepare(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+
+	regmap_clear_bits(csr->regmap, LPASS_RATE_GEN_CTRL, LPASS_RG_CTRL_EN);
+}
+
+static int heartbeat_pulse_is_prepared(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+
+	return regmap_test_bits(csr->regmap, LPASS_RATE_GEN_CTRL, LPASS_RG_CTRL_EN);
+}
+
+static const struct clk_ops heartbeat_pulse_ops = {
+	.prepare = heartbeat_pulse_prepare,
+	.unprepare = heartbeat_pulse_unprepare,
+	.is_prepared = heartbeat_pulse_is_prepared,
+};
+
+static int lpass_va_csr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpass_va_csr *csr;
+	struct clk_init_data init = {
+		.name = "lpass_heartbeat_pulse",
+		.ops = &heartbeat_pulse_ops,
+	};
+	void __iomem *base;
+	int ret;
+
+	csr = devm_kzalloc(dev, sizeof(*csr), GFP_KERNEL);
+	if (!csr)
+		return -ENOMEM;
+
+	csr->data = of_device_get_match_data(dev);
+	if (!csr->data)
+		return dev_err_probe(dev, -EINVAL, "no variant data for compatible\n");
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	csr->regmap = devm_regmap_init_mmio(dev, base,
+					    &lpass_rate_gen_regmap_config);
+	if (IS_ERR(csr->regmap))
+		return dev_err_probe(dev, PTR_ERR(csr->regmap),
+				     "failed to init regmap\n");
+
+	csr->hb_hw.init = &init;
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to enable PM runtime\n");
+
+	ret = devm_clk_hw_register(dev, &csr->hb_hw);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register heartbeat clock\n");
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &csr->hb_hw);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add clock provider\n");
+
+	return 0;
+}
+
+static const struct of_device_id lpass_va_csr_dt_match[] = {
+	{ .compatible = "qcom,hawi-lpass-va-csr", .data = &hawi_csr_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lpass_va_csr_dt_match);
+
+static struct platform_driver lpass_va_csr_driver = {
+	.driver = {
+		.name = "qcom-lpass-va-csr",
+		.of_match_table = lpass_va_csr_dt_match,
+	},
+	.probe = lpass_va_csr_probe,
+};
+
+module_platform_driver(lpass_va_csr_driver);
+
+MODULE_DESCRIPTION("Qualcomm LPASS VA CSR heartbeat pulse clock provider");
+MODULE_LICENSE("GPL");

-- 
2.34.1