[PATCH v6 0/2] Add LPASS VA CSR HeartBeat pulse clock support

The LPASS VA CSR block contains rate generator hardware that produces
a HeartBeat Pulse (also known as RateGen Pulse). This pulse
synchronizes the start of the DMAs and Codec Interfaces for the audio
usecases and can serve as a periodic wakeup source for the DSP.

This series adds the DT binding and driver support to model this
rate generator as a clock provider.

Patch 1 adds the YAML binding for the new qcom,hawi-lpass-va-csr
clock provider node under Documentation/devicetree/bindings/clock/.

Patch 2 adds the lpass-va-csr driver under drivers/clk/qcom that
registers the lpass_heartbeat_pulse clock and enables/disables the
rate generator via regmap when the clock consumer requests it.

Changes in v6:
- Rebase the series on linux-next next-20260821.
- Capitalize Hawi in binding text (Bjorn).
- Simplify the binding example by removing the soc wrapper and
  two-cell address/size setup (Bjorn).
- Keep the full VA CSR register window in the binding and describe it
  as the VA CSR register block after Konrad clarified the earlier
  register-range concern (Bjorn, Konrad).
- Link to v5: https://patch.msgid.link/[email protected]

Changes in v5:
- Add explicit ARM64 Kconfig gating and Qualcomm default-module policy
  for QCOM_CLK_LPASS_HEARTBEAT_PULSE to align with nearby qcom clock
  entries.
- Link to v4: https://patch.msgid.link/[email protected]

Changes in v4:
- Rename the binding filename and schema ID to hawi-specific naming:
  qcom,lpass-va-csr.yaml -> qcom,hawi-lpass-va-csr.yaml (Krzysztof).
- Rename Kconfig symbol QCOM_CLK_LPASS_VA_CSR to
  QCOM_CLK_LPASS_HEARTBEAT_PULSE (Konrad).
- Add devm_pm_runtime_enable() in the lpass-va-csr probe path.
- Drop the qcom,lpass-va-macro binding extension patch; it will be
  resubmitted with the Hawi DTSI changes.
- Drop sound/soc/codecs/Kconfig select wiring to keep this series
  clock-only (Konrad).
- Link to v3: https://lore.kernel.org/all/[email protected]/

Changes in v3:
- Move the qcom,lpass-va-csr binding under
  Documentation/devicetree/bindings/clock/ (Krzysztof).
- Move the driver under drivers/clk/qcom/ (Krzysztof).
- Improve the schema description and use generic clock-controller node
  naming (Krzysztof).
- Use additionalProperties: false and keep compatibles sorted.

Changes in v2:
- Split the qcom,lpass-va-csr and qcom,lpass-va-macro bindings into
  separate patches.
- Fix the qcom,lpass-va-csr example to use a 2-cell reg property.
- Switch heartbeatpulse clk_ops from atomic to sleepable callbacks.

Changes in v1:
- Initial version.

Signed-off-by: Sarath Ganapathiraju <[email protected]>
---
Sarath Ganapathiraju (2):
      dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock
      clk: qcom: Add LPASS VA CSR heartbeat pulse clock

 .../bindings/clock/qcom,hawi-lpass-va-csr.yaml     |  45 +++++++
 drivers/clk/qcom/Kconfig                           |  14 ++
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/lpass-va-csr.c                    | 148 +++++++++++++++++++++
 4 files changed, 208 insertions(+)
---
base-commit: 903c1cf6dff9964e71eda98a39e2e5d442050472
change-id: 20260821-heartbeat-v6-next-20260821-send-506231236ea4

Best regards,
--  
Sarath Ganapathiraju <[email protected]>