[PATCH v2] can: usb: f81604: fix struct f81604_int_data size mismatch

The struct f81604_int_data defines 9 bytes of interrupt data:
- Byte 0: Status register (sr)
- Byte 1: Interrupt register (isrc)
- Byte 2: Interrupt enable register (ier)
- Byte 3: Arbitration lost capture (alc)
- Byte 4: Error code capture (ecc)
- Byte 5: Error warning limit register (ewlr)
- Byte 6: RX error counter (rxerr)
- Byte 7: TX error counter (txerr)
- Byte 8: Reserved (val)

The hardware sends exactly 9 bytes for the interrupt endpoint.
However, the struct was defined with __aligned(4) attribute which
caused the compiler to pad the struct to 12 bytes.

This causes a problem in f81604_read_int_callback() where the short
URB check compares urb->actual_length against sizeof(*data). When
sizeof(struct f81604_int_data) is 12 but the hardware only sends 9
bytes, the check fails and valid interrupt messages are discarded.

This results in the driver only being able to transmit once because
the TX complete interrupt is never processed.

Fix this by removing the __aligned(4) attribute so the struct size
matches the actual hardware data size of 9 bytes.

Fixes: 7299b1b39a25 ("can: usb: f81604: handle short interrupt urb messages properly")
Cc: [email protected]
Reported-by: Dynetrex, Admin <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Ji-Ze Hong (Peter Hong) <[email protected]>
---
v2:
- Added Reported-by and Remove mismatched Fixes tags
---
 drivers/net/can/usb/f81604.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/f81604.c b/drivers/net/can/usb/f81604.c
index f12318268e46..4c147b9d6d69 100644
--- a/drivers/net/can/usb/f81604.c
+++ b/drivers/net/can/usb/f81604.c
@@ -169,7 +169,7 @@ struct f81604_int_data {
 	u8 rxerr;
 	u8 txerr;
 	u8 val;
-} __packed __aligned(4);
+} __packed;
 
 struct f81604_sff {
 	__be16 id;

---
base-commit: a13c140cc289c0b7b3770bce5b3ad42ab35074aa
change-id: 20260824-f81604-fix-aaebd1f42e06

Best regards,
--  
Ji-Ze Hong (Peter Hong) <[email protected]>