Re: [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20260127
Dmitry Baryshkov <[email protected]> Tue, 27 Jan 2026 20:36:15 +0200
| Newsgroups | org.kernel.lore.linux-firmware,org.infradead.lists.ath10k,org.infradead.lists.ath11k,org.infradead.lists.ath12k,org.kernel.vger.linux-wireless |
|---|---|
| Message-ID | <usrawtmodalbj4b4i22tk3hzgbrpt3gdbji4x7vfzdhp6qsb3g@rw2bl7jdnp22> |
On Tue, Jan 27, 2026 at 10:04:46AM -0800, Jeff Johnson wrote: > Hi, > Here's a new pull request for ath10k, ath11k and ath12k. > > No updates for ath10k. > > For ath11k update board files for QCA6698AQ/hw2.1 and WCN6855/hw2.0 to support: > bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268 > bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=255 Don't we need the variant for this one? Otherwise it's too easy to clash with another unprogrammed board. > bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618,variant=QC_QCS615_Ride > bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268 > bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268,variant=QC_Hamoa_IOT_EVK > bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618 > bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618,variant=QC_QCS615_Ride > > For ath12k update firmware for QCN9274/hw2.0. > > Please let me know if there are any problems. > > Thanks, > /jeff -- With best wishes Dmitry