Re: ath12k-firmware: WCN7850 hw2.0: update board-2.bin

On 3/27/2025 9:13 AM, Georg Gottleuber wrote:
> Hi,
> 
> here is a new version of the updates to board-2.bin for WCN7850 hw2.0.
> The content is identical. But this time according to the instructions.
> 
> * hardware description:
> 
>   - M.2 QCNCM865 WI-FI 7 BT Combo-Modul
>   - Qualcomm® FastConnect™ 7800 Mobile chipset
>   - PCI Vendor/Device ID: 17cb:1107
>   - PCI Subsystem: 1eac:8001
>   - radio is for 2.4 GHz, 5 GHz, 6 GHz
>   - Bluetooth
> 
> 
> * origin of the board file
> 
>   - extracted from board-2.bin from linux-firmware
>     ath12k/WCN7850/hw2.0/board-2.bin:
>     bus=pci,vendor=17cb,device=1107,subsystem-vendor=105b,subsystem-
>     device=e10d,qmi-chip-id=2,qmi-board-id=255.bin
> 
> 
> * ids to be used with the board file:
> 
>   - just add an additional board string for
> bus=pci,vendor=17cb,device=1107,subsystem-vendor=105b,subsystem-device=e10d,qmi-chip-id=2,qmi-board-id=255.bin
>     +
> bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8001,qmi-chip-id=2,qmi-board-id=255
>       sha256sum:
>       3ee7d3291e4121431b79adc28dc06f28f0cb12d415e79244061c9349a1328dec
> 
> 
> * attached is the already present file (out of board-2.bin)
> 
> 
> Tested with 2.4GHz, 5GHz and 6GHz (iperf3 -t30 --bidir)
> 
> Best regards,
> Georg
> 

Just want to document that this was handled by:
https://git.codelinaro.org/clo/ath-firmware/ath12k-firmware/-/commit/fd7ddeb46bb57736211092c426bf6cfb2e703281

With the associated linux-firmware pull request:
https://msgid.link/[email protected]