Re: [PATCH v4] ceph: fix OOB read in decode_watchers() via missing bounds check

Ilya Dryomov <[email protected]>
Newsgroups org.kernel.vger.ceph-devel,org.kernel.vger.linux-kernel,org.kernel.vger.stable
Message-ID <CAOi1vP-14HiHikaQuiKPjaMd35ujMu+dE0+V__7Km1o=JHvcDg@mail.gmail.com>
On Wed, Jul 8, 2026 at 7:40 AM Pavitra Jha <[email protected]> wrote:
>
> ceph_start_decoding() validates that struct_len bytes remain in the
> buffer after the encoding header, but accepts struct_len=0 as valid:
> ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
> compromised OSD sends an obj_list_watch_response_t reply with
> struct_len=0, ceph_start_decoding() returns success with p == end,
> leaving zero bytes guaranteed for subsequent reads.
>
> The immediately following ceph_decode_32(p) in decode_watchers() has
> no preceding bounds check. With p == end this is a 4-byte read past
> the validated buffer boundary. The garbage value is then passed
> directly to kzalloc_objs() as the watcher count.
>
> The sibling function decode_watcher() already uses the safe variants
> (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
> after its own ceph_start_decoding() call. decode_watchers() is the
> only site that uses the bare variant, confirming an oversight.
>
> Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
> *num_watchers, bad), consistent with the established pattern.
>
> KASAN report (kernel 7.0.0-rc7, QEMU/x86_64, KASLR disabled):
>
>   [   72.047085] ceph_oob_poc: buf=ffff8880085936c8 end=ffff8880085936ce
>   [   72.048685] ceph_oob_poc: ceph_start_decoding OK: struct_v=1
>   struct_len=0 p==end: 1
>   [   72.049477] ceph_oob_poc: triggering OOB read past slab boundary...
>   [   72.050699] ==================================================
>   [   72.051427] BUG: KASAN: slab-out-of-bounds in
>   ceph_oob_init+0x128/0xff0 [ceph_oob_poc]
>   [   72.051427] Read of size 4 at addr ffff8880085936ce by task insmod/61
>   [   72.051427] CPU: 0 UID: 0 PID: 61 Comm: insmod Tainted: G O
>   [   72.051427]  7.0.0-rc7-g9c2abf69da83-dirty #14 PREEMPT(lazy)
>   [   72.051427] Call Trace:
>   [   72.051427]  dump_stack_lvl+0x4d/0x70
>   [   72.051427]  print_report+0x170/0x4f3
>   [   72.051427]  kasan_report+0xda/0x110
>   [   72.051427]  kasan_check_range+0x125/0x200
>   [   72.051427]  ceph_oob_init+0x128/0xff0 [ceph_oob_poc]
>   [   72.051427]  do_one_initcall+0x9a/0x310
>   [   72.051427]  do_init_module+0x186/0x410
>   [   72.051427]  load_module+0x2ba7/0x2e50
>   [   72.051427]  init_module_from_file+0x15c/0x180
>   [   72.051427]  idempotent_init_module+0x19f/0x430
>   [   72.051427]  __x64_sys_finit_module+0x78/0xc0
>   [   72.051427]  do_syscall_64+0xe2/0x570
>   [   72.051427]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
>   [   72.051427] The buggy address belongs to the object at ffff8880085936c8
>   [   72.051427]  which belongs to the cache kmalloc-8 of size 8
>   [   72.051427] The buggy address is located 0 bytes to the right of
>   [   72.051427]  allocated 6-byte region [ffff8880085936c8, ffff8880085936ce)
>   [   72.051427] Memory state around the buggy address:
>   [   72.051427] >ffff888008593680: fc fc fc fc fc fc fc fc fc 06 fc fc fc fc fc fc
>   [   72.051427]                                               ^
>   [   72.051427] ==================================================
>   [   72.129720] ceph_oob_poc: num_watchers=3435973836 (OOB garbage)
>
> 0xCCCCCCCC (3435973836) is KASAN redzone poison, confirming the read
> landed in the slab redzone immediately past the 6-byte allocation.
>
> Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
> deployment (e.g. cloud) can trigger this against any kernel client
> that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
> beyond OSD session establishment.
>
> Fixes: a4ed38d7a180 ("libceph: support for CEPH_OSD_OP_LIST_WATCHERS")
> Cc: [email protected]
> Reviewed-by: Viacheslav Dubeyko <[email protected]>
> Signed-off-by: Pavitra Jha <[email protected]>
> ---
> v4: Rebase against current linux/master and ceph-testing/testing.
>     No functional changes from Slava's reviewed v3.
> v3: Rename error label e_inval -> bad per Slava Dubeyko's review.
> v2: Correct commit message; retracted overstated impact claims,
>     verified with follow-up KASAN harness.
> ---
>  net/ceph/osd_client.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
> index 2ff00070c..2cdac81a6 100644
> --- a/net/ceph/osd_client.c
> +++ b/net/ceph/osd_client.c
> @@ -5030,7 +5030,7 @@ static int decode_watchers(void **p, void *end,
>         if (ret)
>                 return ret;
>
> -       *num_watchers = ceph_decode_32(p);
> +       ceph_decode_32_safe(p, end, *num_watchers, bad);
>         *watchers = kzalloc_objs(**watchers, *num_watchers, GFP_NOIO);
>         if (!*watchers)
>                 return -ENOMEM;
> @@ -5044,6 +5044,8 @@ static int decode_watchers(void **p, void *end,
>         }
>
>         return 0;
> +bad:
> +       return -EINVAL;
>  }
>
>  /*
> --
> 2.53.0
>

Applied.

Thanks,

                Ilya
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.