[PATCH rdma-next v2 14/14] RDMA/selftests: Add rxe_netns_names test

From: Jiri Pirko <[email protected]>

Add a kselftest script that exercises per-netns RDMA device naming
with RXE. Cover duplicate names across namespaces, move conflict
handling, move-with-rename, and same-namespace rename requests.

Signed-off-by: Jiri Pirko <[email protected]>
---
v1->v2:
- fixed ktap_set_plan
- s/RXE_A/RXE_SAME/ in dup rename
---
 tools/testing/selftests/rdma/Makefile         |   3 +-
 tools/testing/selftests/rdma/config           |   2 +
 .../testing/selftests/rdma/rxe_netns_names.sh | 282 ++++++++++++++++++
 3 files changed, 286 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/rdma/rxe_netns_names.sh

diff --git a/tools/testing/selftests/rdma/Makefile b/tools/testing/selftests/rdma/Makefile
index 07af7f15c1bf..a91c14c45006 100644
--- a/tools/testing/selftests/rdma/Makefile
+++ b/tools/testing/selftests/rdma/Makefile
@@ -3,6 +3,7 @@ TEST_PROGS := rxe_rping_between_netns.sh \
 		rxe_ipv6.sh \
 		rxe_socket_with_netns.sh \
 		rxe_test_NETDEV_UNREGISTER.sh \
-		rxe_sent_rcvd_bytes.sh
+		rxe_sent_rcvd_bytes.sh \
+		rxe_netns_names.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/rdma/config b/tools/testing/selftests/rdma/config
index 4ffb814e253b..e1ff54ec0f57 100644
--- a/tools/testing/selftests/rdma/config
+++ b/tools/testing/selftests/rdma/config
@@ -1,3 +1,5 @@
 CONFIG_TUN
 CONFIG_VETH
+CONFIG_DUMMY
+CONFIG_NET_NS
 CONFIG_RDMA_RXE
diff --git a/tools/testing/selftests/rdma/rxe_netns_names.sh b/tools/testing/selftests/rdma/rxe_netns_names.sh
new file mode 100755
index 000000000000..a4fabf86bdf7
--- /dev/null
+++ b/tools/testing/selftests/rdma/rxe_netns_names.sh
@@ -0,0 +1,282 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Exercise RDMA device name handling across network namespaces.
+
+source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
+
+NAME_PREFIX="rxe_netns_names_$$"
+NETDEV_PREFIX="rxn$$"
+NS1="${NAME_PREFIX}ns1"
+NS2="${NAME_PREFIX}ns2"
+RXE_A="${NAME_PREFIX}rxe_a"
+RXE_B="${NAME_PREFIX}rxe_b"
+RXE_SAME="${NAME_PREFIX}rxe_same"
+RXE_NEW="${NAME_PREFIX}rxe_new"
+DUMMY_A="${NETDEV_PREFIX}a"
+DUMMY_B="${NETDEV_PREFIX}b"
+OLD_MODE=""
+MODE_CHANGED=0
+MODS=("dummy" "rdma_rxe")
+TEST_SAME_NAMES="same RDMA device name can exist in two net namespaces"
+TEST_MOVE_CONFLICT="move without rename fails on destination name conflict"
+TEST_MOVE_RENAME="move then rename succeeds"
+TEST_COMBINED_MOVE_RENAME="move with requested destination name succeeds"
+TEST_SAME_NETNS_DUP_RENAME="same-netns rename rejects duplicate name"
+TEST_TEARDOWN_RETURN="netns delete returns device to init_net and renames on conflict"
+
+ksft_skip()
+{
+	ktap_skip_all "$*"
+	exit "$KSFT_SKIP"
+}
+
+fail()
+{
+	ktap_exit_fail_msg "$*"
+}
+
+need_cmd()
+{
+	command -v "$1" >/dev/null 2>&1 || ksft_skip "missing command: $1"
+}
+
+rdma_ns()
+{
+	local ns=$1
+
+	shift
+	ip netns exec "$ns" rdma "$@"
+}
+
+rdma_dev_exists()
+{
+	local ns=$1
+	local dev=$2
+
+	if [ -n "$ns" ]; then
+		rdma_ns "$ns" dev show "$dev" >/dev/null 2>&1
+	else
+		rdma dev show "$dev" >/dev/null 2>&1
+	fi
+}
+
+add_dummy()
+{
+	local netdev=$1
+
+	ip link add "$netdev" type dummy || return 1
+	ip link set "$netdev" up || return 1
+}
+
+add_rxe()
+{
+	local dev=$1
+	local netdev=$2
+
+	rdma link add "$dev" type rxe netdev "$netdev"
+}
+
+rdma_dev_on_netdev()
+{
+	local netdev=$1
+
+	rdma link show 2>/dev/null | awk -v want="$netdev" '
+		{
+			for (i = 1; i < NF; i++)
+				if ($i == "netdev" && $(i + 1) == want) {
+					dev = $2
+					sub(/\/.*/, "", dev)
+					print dev
+					exit
+				}
+		}'
+}
+
+wait_rdma_dev_on_netdev()
+{
+	local netdev=$1
+	local dev
+	local i
+
+	for i in $(seq 1 50); do
+		dev=$(rdma_dev_on_netdev "$netdev")
+		if [ -n "$dev" ]; then
+			echo "$dev"
+			return 0
+		fi
+		sleep 0.1
+	done
+
+	return 1
+}
+
+setup_devs()
+{
+	cleanup_devs
+
+	add_dummy "$DUMMY_A" || return 1
+	add_dummy "$DUMMY_B" || return 1
+
+	add_rxe "$RXE_A" "$DUMMY_A" || return 1
+	add_rxe "$RXE_B" "$DUMMY_B" || return 1
+}
+
+cleanup_devs()
+{
+	ip link del "$DUMMY_A" 2>/dev/null
+	ip link del "$DUMMY_B" 2>/dev/null
+}
+
+setup()
+{
+	OLD_MODE=$(rdma system show 2>/dev/null |
+		   sed -n 's/.*netns \([^ ]*\).*/\1/p')
+	[ -n "$OLD_MODE" ] || ksft_skip "failed to read RDMA netns mode"
+
+	rdma system set netns exclusive >/dev/null 2>&1 ||
+		ksft_skip "rdma netns exclusive mode is not supported"
+	MODE_CHANGED=1
+
+	ip netns add "$NS1" || return 1
+	ip netns add "$NS2" || return 1
+}
+
+cleanup()
+{
+	cleanup_devs
+
+	ip netns del "$NS1" 2>/dev/null
+	ip netns del "$NS2" 2>/dev/null
+
+	if [ "$MODE_CHANGED" -eq 1 ]; then
+		rdma system set netns "$OLD_MODE" 2>/dev/null
+	fi
+
+	for m in "${MODS[@]}"; do
+		modprobe -r "$m" 2>/dev/null
+	done
+}
+
+rdma_supports_combined_move_rename()
+{
+	rdma dev help 2>&1 | grep -Eq 'netns .*name|name .*netns'
+}
+
+[ "$(id -u)" -eq 0 ] || ksft_skip "must be run as root"
+need_cmd ip
+need_cmd rdma
+need_cmd modprobe
+
+trap cleanup EXIT
+
+for m in "${MODS[@]}"; do
+	modinfo "$m" >/dev/null 2>&1 || ksft_skip "module $m not found"
+	modprobe "$m" || fail "failed to load $m"
+done
+
+setup || fail "failed to create net namespaces"
+
+ktap_print_header
+ktap_set_plan 6
+
+if setup_devs &&
+   rdma dev set "$RXE_A" netns "$NS1" &&
+   rdma_ns "$NS1" dev set "$RXE_A" name "$RXE_SAME" &&
+   rdma dev set "$RXE_B" netns "$NS2" &&
+   rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME" &&
+   rdma_dev_exists "$NS1" "$RXE_SAME" &&
+   rdma_dev_exists "$NS2" "$RXE_SAME"; then
+	ktap_test_pass "$TEST_SAME_NAMES"
+else
+	ktap_test_fail "$TEST_SAME_NAMES"
+fi
+cleanup_devs
+
+if ! setup_devs ||
+   ! rdma dev set "$RXE_A" netns "$NS1" ||
+   ! rdma_ns "$NS1" dev set "$RXE_A" name "$RXE_SAME" ||
+   ! rdma dev set "$RXE_B" netns "$NS2" ||
+   ! rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME"; then
+	ktap_test_fail "$TEST_MOVE_CONFLICT"
+elif rdma_ns "$NS1" dev set "$RXE_SAME" netns "$NS2" >/dev/null 2>&1; then
+	ktap_test_fail "$TEST_MOVE_CONFLICT"
+elif rdma_dev_exists "$NS1" "$RXE_SAME" &&
+     rdma_dev_exists "$NS2" "$RXE_SAME"; then
+	ktap_test_pass "$TEST_MOVE_CONFLICT"
+else
+	ktap_test_fail "$TEST_MOVE_CONFLICT"
+fi
+cleanup_devs
+
+if ! setup_devs; then
+	ktap_test_fail "$TEST_MOVE_RENAME"
+elif rdma dev set "$RXE_A" netns "$NS2" &&
+     rdma_ns "$NS2" dev set "$RXE_A" name "$RXE_NEW"; then
+	if rdma_dev_exists "$NS2" "$RXE_NEW" &&
+	   ! rdma_dev_exists "" "$RXE_A"; then
+		ktap_test_pass "$TEST_MOVE_RENAME"
+	else
+		ktap_test_fail "$TEST_MOVE_RENAME"
+	fi
+else
+	ktap_test_fail "$TEST_MOVE_RENAME"
+fi
+cleanup_devs
+
+if ! rdma_supports_combined_move_rename; then
+	ktap_test_skip "$TEST_COMBINED_MOVE_RENAME"
+elif ! setup_devs; then
+	ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
+elif rdma dev set "$RXE_A" netns "$NS2" name "$RXE_NEW"; then
+	if rdma_dev_exists "$NS2" "$RXE_NEW" &&
+	   ! rdma_dev_exists "" "$RXE_A"; then
+		ktap_test_pass "$TEST_COMBINED_MOVE_RENAME"
+	else
+		ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
+	fi
+else
+	ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
+fi
+cleanup_devs
+
+if ! setup_devs; then
+	ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
+elif rdma dev set "$RXE_A" name "$RXE_SAME" &&
+     rdma dev set "$RXE_B" name "$RXE_NEW"; then
+	if rdma dev set "$RXE_SAME" name "$RXE_NEW" >/dev/null 2>&1; then
+		ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
+	elif rdma_dev_exists "" "$RXE_SAME" &&
+	     rdma_dev_exists "" "$RXE_NEW"; then
+		ktap_test_pass "$TEST_SAME_NETNS_DUP_RENAME"
+	else
+		ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
+	fi
+else
+	ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
+fi
+cleanup_devs
+
+if ! setup_devs; then
+	ktap_test_fail "$TEST_TEARDOWN_RETURN"
+elif ! rdma dev set "$RXE_A" name "$RXE_SAME" ||
+     ! rdma dev set "$RXE_B" netns "$NS2" ||
+     ! rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME" ||
+     ! rdma_dev_exists "$NS2" "$RXE_SAME"; then
+	ktap_test_fail "$TEST_TEARDOWN_RETURN"
+else
+	ip netns del "$NS2"
+	returned=$(wait_rdma_dev_on_netdev "$DUMMY_B")
+	ktap_print_msg "device returned to init_net as '${returned:-<missing>}'"
+	if rdma_dev_exists "" "$RXE_SAME" &&
+	   [ -n "$returned" ] &&
+	   [ "$returned" != "$RXE_SAME" ] &&
+	   [ "${returned#ibdev}" != "$returned" ]; then
+		ktap_test_pass "$TEST_TEARDOWN_RETURN"
+	else
+		ktap_test_fail "$TEST_TEARDOWN_RETURN"
+	fi
+fi
+cleanup_devs
+
+ktap_finished
-- 
2.54.0