Re: [PATCH rdma-next v3 14/14] RDMA/selftests: Add rxe_netns_names test

在 2026/7/16 6:23, Jiri Pirko 写道:
> From: Jiri Pirko <[email protected]>
>
> Add a kselftest script that exercises per-netns RDMA device naming
> with RXE. Cover duplicate names across namespaces, move conflict
> handling, move-with-rename, and same-namespace rename requests.
>
> Signed-off-by: Jiri Pirko <[email protected]>
> ---
> v2->v3:
> - added wait for rdma devices are removed
> - added retry for old rdma netns mode restore
> v1->v2:
> - fixed ktap_set_plan
> - s/RXE_A/RXE_SAME/ in dup rename
> ---
>   tools/testing/selftests/rdma/Makefile         |   3 +-
>   tools/testing/selftests/rdma/config           |   2 +
>   .../testing/selftests/rdma/rxe_netns_names.sh | 334 ++++++++++++++++++
>   3 files changed, 338 insertions(+), 1 deletion(-)
>   create mode 100755 tools/testing/selftests/rdma/rxe_netns_names.sh
>
> diff --git a/tools/testing/selftests/rdma/Makefile b/tools/testing/selftests/rdma/Makefile
> index 07af7f15c1bf..a91c14c45006 100644
> --- a/tools/testing/selftests/rdma/Makefile
> +++ b/tools/testing/selftests/rdma/Makefile
> @@ -3,6 +3,7 @@ TEST_PROGS := rxe_rping_between_netns.sh \
>   		rxe_ipv6.sh \
>   		rxe_socket_with_netns.sh \
>   		rxe_test_NETDEV_UNREGISTER.sh \
> -		rxe_sent_rcvd_bytes.sh
> +		rxe_sent_rcvd_bytes.sh \
> +		rxe_netns_names.sh
>   
>   include ../lib.mk
> diff --git a/tools/testing/selftests/rdma/config b/tools/testing/selftests/rdma/config
> index 4ffb814e253b..e1ff54ec0f57 100644
> --- a/tools/testing/selftests/rdma/config
> +++ b/tools/testing/selftests/rdma/config
> @@ -1,3 +1,5 @@
>   CONFIG_TUN
>   CONFIG_VETH
> +CONFIG_DUMMY
> +CONFIG_NET_NS
>   CONFIG_RDMA_RXE
> diff --git a/tools/testing/selftests/rdma/rxe_netns_names.sh b/tools/testing/selftests/rdma/rxe_netns_names.sh
> new file mode 100755
> index 000000000000..f40118407f4c
> --- /dev/null
> +++ b/tools/testing/selftests/rdma/rxe_netns_names.sh
> @@ -0,0 +1,334 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Exercise RDMA device name handling across network namespaces.
> +
> +source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
> +
> +NAME_PREFIX="rxe_netns_names_$$"
> +NETDEV_PREFIX="rxn$$"
> +NS1="${NAME_PREFIX}ns1"
> +NS2="${NAME_PREFIX}ns2"
> +RXE_A="${NAME_PREFIX}rxe_a"
> +RXE_B="${NAME_PREFIX}rxe_b"
> +RXE_SAME="${NAME_PREFIX}rxe_same"
> +RXE_NEW="${NAME_PREFIX}rxe_new"
> +DUMMY_A="${NETDEV_PREFIX}a"
> +DUMMY_B="${NETDEV_PREFIX}b"
> +OLD_MODE=""
> +MODE_CHANGED=0
> +MODS=("dummy" "rdma_rxe")
> +TEST_SAME_NAMES="same RDMA device name can exist in two net namespaces"
> +TEST_MOVE_CONFLICT="move without rename fails on destination name conflict"
> +TEST_MOVE_RENAME="move then rename succeeds"
> +TEST_COMBINED_MOVE_RENAME="move with requested destination name succeeds"
> +TEST_SAME_NETNS_DUP_RENAME="same-netns rename rejects duplicate name"
> +TEST_TEARDOWN_RETURN="netns delete returns device to init_net and renames on conflict"
> +
> +ksft_skip()
> +{
> +	ktap_skip_all "$*"
> +	exit "$KSFT_SKIP"
> +}
> +
> +fail()
> +{
> +	ktap_exit_fail_msg "$*"
> +}
> +
> +need_cmd()
> +{
> +	command -v "$1" >/dev/null 2>&1 || ksft_skip "missing command: $1"
> +}
> +
> +rdma_ns()
> +{
> +	local ns=$1
> +
> +	shift
> +	ip netns exec "$ns" rdma "$@"
> +}
> +
> +rdma_dev_exists()
> +{
> +	local ns=$1
> +	local dev=$2
> +
> +	if [ -n "$ns" ]; then
> +		rdma_ns "$ns" dev show "$dev" >/dev/null 2>&1
> +	else
> +		rdma dev show "$dev" >/dev/null 2>&1
> +	fi
> +}
> +
> +add_dummy()
> +{
> +	local netdev=$1
> +
> +	ip link add "$netdev" type dummy || return 1
> +	ip link set "$netdev" up || return 1
> +}
> +
> +add_rxe()
> +{
> +	local dev=$1
> +	local netdev=$2
> +
> +	rdma link add "$dev" type rxe netdev "$netdev"
> +}
> +
> +rdma_dev_on_netdev()
> +{
> +	local netdev=$1
> +
> +	rdma link show 2>/dev/null | awk -v want="$netdev" '
> +		{
> +			for (i = 1; i < NF; i++)
> +				if ($i == "netdev" && $(i + 1) == want) {
> +					dev = $2
> +					sub(/\/.*/, "", dev)
> +					print dev
> +					exit
> +				}
> +		}'
> +}
> +
> +wait_rdma_dev_on_netdev()
> +{
> +	local netdev=$1
> +	local dev
> +	local i
> +
> +	for i in $(seq 1 50); do
> +		dev=$(rdma_dev_on_netdev "$netdev")
> +		if [ -n "$dev" ]; then
> +			echo "$dev"
> +			return 0
> +		fi
> +		sleep 0.1
> +	done
> +
> +	return 1
> +}
> +
> +# ip link del returns after NETDEV_UNREGISTER, but rxe tears the RDMA device
> +# down asynchronously via ib_unregister_device_queued(). Wait until our names
> +# are gone.
> +wait_rdma_devs_gone()
> +{
> +	local i name ns
> +	local names=("$RXE_A" "$RXE_B" "$RXE_SAME" "$RXE_NEW")
> +
> +	for i in $(seq 1 50); do
> +		local found=0
> +
> +		for name in "${names[@]}"; do
> +			if rdma_dev_exists "" "$name"; then
> +				found=1
> +				break
> +			fi
> +			for ns in "$NS1" "$NS2"; do
> +				ip netns exec "$ns" true 2>/dev/null || continue
> +				if rdma_dev_exists "$ns" "$name"; then
> +					found=1
> +					break 2
> +				fi
> +			done
> +		done
> +
> +		[ "$found" -eq 0 ] && return 0
> +		sleep 0.1
> +	done
> +
> +	return 1
> +}
> +
> +setup_devs()
> +{
> +	cleanup_devs || return 1
> +
> +	add_dummy "$DUMMY_A" || return 1
> +	add_dummy "$DUMMY_B" || return 1
> +
> +	add_rxe "$RXE_A" "$DUMMY_A" || return 1
> +	add_rxe "$RXE_B" "$DUMMY_B" || return 1
> +}
> +
> +cleanup_devs()
> +{
> +	ip link del "$DUMMY_A" 2>/dev/null
> +	ip link del "$DUMMY_B" 2>/dev/null
> +	wait_rdma_devs_gone
> +}
> +
> +setup()
> +{
> +	OLD_MODE=$(rdma system show 2>/dev/null |
> +		   sed -n 's/.*netns \([^ ]*\).*/\1/p')
> +	[ -n "$OLD_MODE" ] || ksft_skip "failed to read RDMA netns mode"
> +
> +	rdma system set netns exclusive >/dev/null 2>&1 ||
> +		ksft_skip "rdma netns exclusive mode is not supported"
> +	MODE_CHANGED=1
> +
> +	ip netns add "$NS1" || return 1
> +	ip netns add "$NS2" || return 1
> +}
> +
> +# ip netns del returns before rdma_dev_exit_net() removes the net from
> +# rdma_nets. rdma_compatdev_set() returns -EBUSY until that completes, so
> +# retry the mode restore instead of leaving the system in exclusive mode.
> +restore_netns_mode()
> +{
> +	local i
> +
> +	[ "$MODE_CHANGED" -eq 1 ] || return 0
> +
> +	for i in $(seq 1 50); do
> +		if rdma system set netns "$OLD_MODE" >/dev/null 2>&1; then
> +			MODE_CHANGED=0
> +			return 0
> +		fi
> +		sleep 0.1
> +	done
> +
> +	echo "warning: failed to restore RDMA netns mode to $OLD_MODE" >&2
> +	return 1
> +}
> +
> +cleanup()
> +{
> +	cleanup_devs
> +
> +	ip netns del "$NS1" 2>/dev/null
> +	ip netns del "$NS2" 2>/dev/null
> +
> +	restore_netns_mode
> +
> +	for m in "${MODS[@]}"; do
> +		modprobe -r "$m" 2>/dev/null
> +	done
> +}
> +
> +rdma_supports_combined_move_rename()
> +{
> +	rdma dev help 2>&1 | grep -Eq 'netns .*name|name .*netns'
> +}
> +
> +[ "$(id -u)" -eq 0 ] || ksft_skip "must be run as root"
> +need_cmd ip
> +need_cmd rdma
> +need_cmd modprobe
> +
> +trap cleanup EXIT
> +
> +for m in "${MODS[@]}"; do
> +	modinfo "$m" >/dev/null 2>&1 || ksft_skip "module $m not found"
> +	modprobe "$m" || fail "failed to load $m"
> +done
> +
> +setup || fail "failed to create net namespaces"
> +
> +ktap_print_header
> +ktap_set_plan 6

Hi, Jiri

Thanks a lot.

With the first version of this patch series, I already ran the selftests 
with RXE, and everything worked as expected.

Only test case 4 was skipped because it depends on a recent commit.

Once that commit is merged, I'll rerun the tests.

As for the numbering, I'm fine with changing it from 7 to 6.

Thanks a lot.

Zhu Yanjun

> +
> +if setup_devs &&
> +   rdma dev set "$RXE_A" netns "$NS1" &&
> +   rdma_ns "$NS1" dev set "$RXE_A" name "$RXE_SAME" &&
> +   rdma dev set "$RXE_B" netns "$NS2" &&
> +   rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME" &&
> +   rdma_dev_exists "$NS1" "$RXE_SAME" &&
> +   rdma_dev_exists "$NS2" "$RXE_SAME"; then
> +	ktap_test_pass "$TEST_SAME_NAMES"
> +else
> +	ktap_test_fail "$TEST_SAME_NAMES"
> +fi
> +cleanup_devs
> +
> +if ! setup_devs ||
> +   ! rdma dev set "$RXE_A" netns "$NS1" ||
> +   ! rdma_ns "$NS1" dev set "$RXE_A" name "$RXE_SAME" ||
> +   ! rdma dev set "$RXE_B" netns "$NS2" ||
> +   ! rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME"; then
> +	ktap_test_fail "$TEST_MOVE_CONFLICT"
> +elif rdma_ns "$NS1" dev set "$RXE_SAME" netns "$NS2" >/dev/null 2>&1; then
> +	ktap_test_fail "$TEST_MOVE_CONFLICT"
> +elif rdma_dev_exists "$NS1" "$RXE_SAME" &&
> +     rdma_dev_exists "$NS2" "$RXE_SAME"; then
> +	ktap_test_pass "$TEST_MOVE_CONFLICT"
> +else
> +	ktap_test_fail "$TEST_MOVE_CONFLICT"
> +fi
> +cleanup_devs
> +
> +if ! setup_devs; then
> +	ktap_test_fail "$TEST_MOVE_RENAME"
> +elif rdma dev set "$RXE_A" netns "$NS2" &&
> +     rdma_ns "$NS2" dev set "$RXE_A" name "$RXE_NEW"; then
> +	if rdma_dev_exists "$NS2" "$RXE_NEW" &&
> +	   ! rdma_dev_exists "" "$RXE_A"; then
> +		ktap_test_pass "$TEST_MOVE_RENAME"
> +	else
> +		ktap_test_fail "$TEST_MOVE_RENAME"
> +	fi
> +else
> +	ktap_test_fail "$TEST_MOVE_RENAME"
> +fi
> +cleanup_devs
> +
> +if ! rdma_supports_combined_move_rename; then
> +	ktap_test_skip "$TEST_COMBINED_MOVE_RENAME"
> +elif ! setup_devs; then
> +	ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
> +elif rdma dev set "$RXE_A" netns "$NS2" name "$RXE_NEW"; then
> +	if rdma_dev_exists "$NS2" "$RXE_NEW" &&
> +	   ! rdma_dev_exists "" "$RXE_A"; then
> +		ktap_test_pass "$TEST_COMBINED_MOVE_RENAME"
> +	else
> +		ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
> +	fi
> +else
> +	ktap_test_fail "$TEST_COMBINED_MOVE_RENAME"
> +fi
> +cleanup_devs
> +
> +if ! setup_devs; then
> +	ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
> +elif rdma dev set "$RXE_A" name "$RXE_SAME" &&
> +     rdma dev set "$RXE_B" name "$RXE_NEW"; then
> +	if rdma dev set "$RXE_SAME" name "$RXE_NEW" >/dev/null 2>&1; then
> +		ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
> +	elif rdma_dev_exists "" "$RXE_SAME" &&
> +	     rdma_dev_exists "" "$RXE_NEW"; then
> +		ktap_test_pass "$TEST_SAME_NETNS_DUP_RENAME"
> +	else
> +		ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
> +	fi
> +else
> +	ktap_test_fail "$TEST_SAME_NETNS_DUP_RENAME"
> +fi
> +cleanup_devs
> +
> +if ! setup_devs; then
> +	ktap_test_fail "$TEST_TEARDOWN_RETURN"
> +elif ! rdma dev set "$RXE_A" name "$RXE_SAME" ||
> +     ! rdma dev set "$RXE_B" netns "$NS2" ||
> +     ! rdma_ns "$NS2" dev set "$RXE_B" name "$RXE_SAME" ||
> +     ! rdma_dev_exists "$NS2" "$RXE_SAME"; then
> +	ktap_test_fail "$TEST_TEARDOWN_RETURN"
> +else
> +	ip netns del "$NS2"
> +	returned=$(wait_rdma_dev_on_netdev "$DUMMY_B")
> +	ktap_print_msg "device returned to init_net as '${returned:-<missing>}'"
> +	if rdma_dev_exists "" "$RXE_SAME" &&
> +	   [ -n "$returned" ] &&
> +	   [ "$returned" != "$RXE_SAME" ] &&
> +	   [ "${returned#ibdev}" != "$returned" ]; then
> +		ktap_test_pass "$TEST_TEARDOWN_RETURN"
> +	else
> +		ktap_test_fail "$TEST_TEARDOWN_RETURN"
> +	fi
> +fi
> +cleanup_devs
> +
> +ktap_finished

-- 
Best Regards,
Yanjun.Zhu