https://bugzilla.kernel.org/show_bug.cgi?id=77201
--- Comment #59 from Viresh Kumar <[email protected]> ---
(In reply to Mauro from comment #58)
> Not much luck with this approach I'm afraid. I have compiled your updated
> branch with no reverts and changed the config to include only the userspace
> governor.
>
> Then proceeded to test as before:
> cat /proc/kmsg &
> echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
> echo 0 > /sys/devices/system/cpu/cpu1/online
> echo 1 > /sys/devices/system/cpu/cpu1/online
> echo 1800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
> echo 2200000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
>
> When trying to change the frequency to 2.2GHz the machine becomes
> unresponsive and there is no output :(
Were you getting a lot of prints during earlier frequency transitions?
Its awkward as we were getting enough prints earlier, what happened now ?
> I have noticed something that may or may not be important, it doesn't matter
> if I do
> 800M - cpu offline/online - 1.8G - 2.2G
> or
> 800M - cpu offline/online - 2.2G - 1.8G
>
> The machine always becomes unresponsive when trying to do the second
> frequency change after cpu offline/online.
This surely is a important observation.
> I have pictures of the process, I
> can attach them if you think they are important, but like I said when the
> machine hangs there is zero output :(
Still I want to see how bad it is now, just attach them :)
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.