cpufreq-info SIGKILL or freeze unkillable in read(.../cpu0/cpufreq/stats/time_in_state)
Jonas Bechtel <[email protected]> Mon, 24 May 2021 14:51:39 +0200
| Newsgroups | org.kernel.vger.cpufreq |
|---|---|
| Message-ID | <20210524145139.5bbcf966@mmluhan> |
--MP_/DHKDSFwCl89tLoR45ui7s6R Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi there, here's some strange bug. Bug is reproducible: BIOS: Set AMD overclocking configuration to Auto Linux: /proc/cpuinfo and cpufreq-info show 1000 MHz on idle Reboot BIOS: Set AMD overclocking configuration to x7 (1400 MHz) Linux: /proc/cpuinfo shows 1000 MHz on idle Start Browser Start cpufreq-info: output see attachment 01 screen flickers 1x, one black block ~9x15px appears in upper left corner cpu load ceases (browser loaded) Start cpufreq-info: output see attachment 02 screen flickers 1x, screen becomes normal again cpufreq-info is in an endless loop, unkillable strace on cpu-freq is unkillable, also Interaction with some programs become very slow (need to wait for file sys= tem access?) but xterm with new bash prompt opens/closes in normal speed System cann't reboot but SysRq 'b' is working Reboot Start cpufreq-info: strace see attachment 03 Same effects as 01 Start cpufreq-info: strace see attachment 04 Same effects as 02, but after call 04 the black block keeps flickering CPU AMD Athlon64 X2 Kernel 4.4.0, 64 bit cpufreq-info 32 bit 008-1.1 (Debian) Screen driver /usr/lib/xorg/modules/libfb.so for X 1.20.4 Kernel modules radeon and radeonfb loaded (Most probably radeon is active, = radeonfb inactive) All attachments (01, 02, 03, 04) are also copied in this message. I hope this bug report is right in this list. I hope it helps. I don't need= a reply for my daily work (just leaving "overclocking" set to "Auto") but = I want to leave the comment here that I have the impression that the Linux = support of old hardware is ceasing (e.g. Irda, graphics) - some things are = working with old kernels and don't anymore with newer kernels (drivers stil= l present but don't fit to each other). Best regards Jonas Bechtel =3D=3D 01 =3D=3D Bitte melden Sie Fehler an [email protected]. analysiere CPU 0: Treiber: powernow-k8 Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1 Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1 Maximale Dauer eines Taktfrequenzwechsels: 109 us. Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz m=C3=B6gliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.8= 0 GHz, 1000 MHz m=C3=B6gliche Regler: ondemand, performance momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz. liegen. Der Regler "ondemand" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet w= ird. momentane Taktfrequenz ist 2.40 GHz. Get=C3=B6tet =3D=3D 02 =3D=3D cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Bitte melden Sie Fehler an [email protected]. analysiere CPU 0: Treiber: powernow-k8 Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1 Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1 Maximale Dauer eines Taktfrequenzwechsels: 109 us. Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz m=C3=B6gliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.8= 0 GHz, 1000 MHz m=C3=B6gliche Regler: ondemand, performance momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz. liegen. Der Regler "ondemand" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet w= ird. momentane Taktfrequenz ist 1000 MHz. [Hanging unkillable here] =3D=3D 03 =3D=3D execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */)= =3D 0 brk(NULL) =3D 0x565b7000 access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = =3D 0xf770f000 access("/etc/ld.so.preload", R_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O= _LARGEFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) =3D -1 ENOENT (Datei ode= r Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARG= EFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Ver= zeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARG= EFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Ver= zeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE= |O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Verzeich= nis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LAR= GEFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Ve= rzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFIL= E|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Verzeic= hnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFIL= E|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/sse2", 0xffcc4ed0) =3D -1 ENOENT (Datei oder Verzeic= hnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_C= LOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib", {st_mode=3DS_IFDIR|0755, st_size=3D248, ...}) =3D 0 openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CL= OEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D= -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXE= C) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 = ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D220379, ...}) =3D 0 mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf76d9000 close(3) =3D 0 access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"...= , 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D26160, ...}) =3D 0 mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf76d10= 00 mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENY= WRITE, 3, 0x2000) =3D 0xf76d3000 mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, = 0x4000) =3D 0xf76d5000 mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DEN= YWRITE, 3, 0x5000) =3D 0xf76d7000 close(3) =3D 0 openat(AT_FDCWD, "[redacted]/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC)= =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 EN= OENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D= -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 E= NOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 E= NOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 ENOENT= (Datei oder Verzeichnis nicht gefunden) access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CL= OEXEC) =3D 3 read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0= \0"..., 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0755, st_size=3D1947056, ...}) =3D 0 mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf74f= 3000 mprotect(0xf750c000, 1830912, PROT_NONE) =3D 0 mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_D= ENYWRITE, 3, 0x19000) =3D 0xf750c000 mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3= , 0x167000) =3D 0xf765a000 mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DE= NYWRITE, 3, 0x1d7000) =3D 0xf76cb000 mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_AN= ONYMOUS, -1, 0) =3D 0xf76ce000 close(3) =3D 0 set_thread_area({entry_number=3D-1, base_addr=3D0xf7710500, limit=3D0x0ffff= f, seg_32bit=3D1, contents=3D0, read_exec_only=3D0, limit_in_pages=3D1, seg= _not_present=3D0, useable=3D1}) =3D 0 (entry_number=3D12) mprotect(0xf76cb000, 8192, PROT_READ) =3D 0 mprotect(0xf76d7000, 4096, PROT_READ) =3D 0 mprotect(0x565b5000, 4096, PROT_READ) =3D 0 mprotect(0xf773c000, 4096, PROT_READ) =3D 0 munmap(0xf76d9000, 220379) =3D 0 brk(NULL) =3D 0x565b7000 brk(0x565d8000) =3D 0x565d8000 brk(0x565d9000) =3D 0x565d9000 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_C= LOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D9814000, ...}) =3D 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf72f3000 mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) =3D 0xf7079000 close(3) =3D 0 fstat64(1, {st_mode=3DS_IFCHR|0600, st_rdev=3Dmakedev(0x88, 0), ...}) =3D 0 write(1, "cpufrequtils 008: cpufreq-info ("..., 63) =3D 63 openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D2995, ...}) =3D 0 read(3, "# Locale name alias data base.\n#"..., 4096) =3D 2995 read(3, "", 4096) =3D 0 close(3) =3D 0 openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDON= LY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D10540, ...}) =3D 0 mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf770c000 close(3) =3D 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDO= NLY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D26400, ...}) =3D 0 mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) =3D 0xf7705000 close(3) =3D 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_L= ARGEFILE|O_CLOEXEC) =3D 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\= 0"..., 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D13736, ...}) =3D 0 mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf77000= 00 mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENY= WRITE, 3, 0x1000) =3D 0xf7701000 mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, = 0x2000) =3D 0xf7702000 mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DEN= YWRITE, 3, 0x2000) =3D 0xf7703000 close(3) =3D 0 mprotect(0xf7703000, 4096, PROT_READ) =3D 0 write(1, "Bitte melden Sie Fehler an cpufr"..., 52) =3D 52 openat(AT_FDCWD, "/proc/stat", O_RDONLY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0444, st_size=3D0, ...}) =3D 0 read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) =3D 1024 read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) =3D 263 read(3, "", 1024) =3D 0 close(3) =3D 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=3DS_IFDIR|0755, st_size=3D= 0, ...}) =3D 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=3DS_IFDIR|0755, st_size=3D= 0, ...}) =3D 0 write(1, "analysiere CPU 0:\n", 18) =3D 18 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O= _RDONLY) =3D -1 EACCES (Keine Berechtigung) openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_R= DONLY) =3D 3 read(3, "powernow-k8\n", 4095) =3D 12 close(3) =3D 0 write(1, " Treiber: powernow-k8\n", 23) =3D 23 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDO= NLY) =3D 3 read(3, "0 1\n", 4095) =3D 4 close(3) =3D 0 write(1, " Folgende CPUs laufen mit der g"..., 67) =3D 67 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RD= ONLY) =3D 3 read(3, "0 1\n", 4095) =3D 4 close(3) =3D 0 write(1, " Die Taktfrequenz folgender CPU"..., 71) =3D 71 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_l= atency", O_RDONLY) =3D 3 read(3, "109000\n", 4095) =3D 7 close(3) =3D 0 write(1, " Maximale Dauer eines Taktfrequ"..., 53) =3D 53 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O= _RDONLY) =3D 3 read(3, "2500000\n", 4095) =3D 8 close(3) =3D 0 write(1, " Hardwarebedingte Grenzen der T"..., 65) =3D 65 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_fr= equencies", O_RDONLY) =3D 3 read(3, "2500000 2400000 2200000 2000000 "..., 4095) =3D 49 close(3) =3D 0 write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) =3D 87 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_go= vernors", O_RDONLY) =3D 3 read(3, "ondemand performance \n", 4095) =3D 22 close(3) =3D 0 write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) =3D 42 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O= _RDONLY) =3D 3 read(3, "ondemand\n", 4095) =3D 9 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O= _RDONLY) =3D 3 read(3, "2500000\n", 4095) =3D 8 close(3) =3D 0 write(1, " momentane Taktik: die Frequenz"..., 71) =3D 71 write(1, " liegen. Der "..., 153) =3D 153 write(1, " momentane Taktfrequenz ist 100"..., 39) =3D 39 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state"= , O_RDONLY) =3D 3 read(3, <unfinished ...>) =3D ? +++ killed by SIGKILL +++ =3D=3D 04 =3D=3D execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */)= =3D 0 brk(NULL) =3D 0x5658c000 access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = =3D 0xf771d000 access("/etc/ld.so.preload", R_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O= _LARGEFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) =3D -1 ENOENT (Datei ode= r Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARG= EFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686", 0xffda9ac0) =3D -1 ENOENT (Datei oder Ver= zeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARG= EFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) =3D -1 ENOENT (Datei oder Ver= zeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE= |O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls", 0xffda9ac0) =3D -1 ENOENT (Datei oder Verzeich= nis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LAR= GEFILE|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) =3D -1 ENOENT (Datei oder Ve= rzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFIL= E|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686", 0xffda9ac0) =3D -1 ENOENT (Datei oder Verzeic= hnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFIL= E|O_CLOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/sse2", 0xffda9ac0) =3D -1 ENOENT (Datei oder Verzeic= hnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_C= LOEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib", {st_mode=3DS_IFDIR|0755, st_size=3D248, ...}) =3D 0 openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CL= OEXEC) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D= -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXE= C) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 = ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D220379, ...}) =3D 0 mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf76e7000 close(3) =3D 0 access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"...= , 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D26160, ...}) =3D 0 mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf76df0= 00 mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENY= WRITE, 3, 0x2000) =3D 0xf76e1000 mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, = 0x4000) =3D 0xf76e3000 mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DEN= YWRITE, 3, 0x5000) =3D 0xf76e5000 close(3) =3D 0 openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC= ) =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC)= =3D -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 EN= OENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D= -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 E= NOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 E= NOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) =3D -1 ENOENT= (Datei oder Verzeichnis nicht gefunden) access("/etc/ld.so.nohwcap", F_OK) =3D -1 ENOENT (Datei oder Verzeichn= is nicht gefunden) openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CL= OEXEC) =3D 3 read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0= \0"..., 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0755, st_size=3D1947056, ...}) =3D 0 mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf750= 1000 mprotect(0xf751a000, 1830912, PROT_NONE) =3D 0 mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_D= ENYWRITE, 3, 0x19000) =3D 0xf751a000 mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3= , 0x167000) =3D 0xf7668000 mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DE= NYWRITE, 3, 0x1d7000) =3D 0xf76d9000 mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_AN= ONYMOUS, -1, 0) =3D 0xf76dc000 close(3) =3D 0 set_thread_area({entry_number=3D-1, base_addr=3D0xf771e500, limit=3D0x0ffff= f, seg_32bit=3D1, contents=3D0, read_exec_only=3D0, limit_in_pages=3D1, seg= _not_present=3D0, useable=3D1}) =3D 0 (entry_number=3D12) mprotect(0xf76d9000, 8192, PROT_READ) =3D 0 mprotect(0xf76e5000, 4096, PROT_READ) =3D 0 mprotect(0x5658a000, 4096, PROT_READ) =3D 0 mprotect(0xf774a000, 4096, PROT_READ) =3D 0 munmap(0xf76e7000, 220379) =3D 0 brk(NULL) =3D 0x5658c000 brk(0x565ad000) =3D 0x565ad000 brk(0x565ae000) =3D 0x565ae000 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_C= LOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D9814000, ...}) =3D 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf7301000 mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) =3D 0xf7087000 close(3) =3D 0 fstat64(1, {st_mode=3DS_IFCHR|0600, st_rdev=3Dmakedev(0x88, 0), ...}) =3D 0 write(1, "cpufrequtils 008: cpufreq-info ("..., 63) =3D 63 openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D2995, ...}) =3D 0 read(3, "# Locale name alias data base.\n#"..., 4096) =3D 2995 read(3, "", 4096) =3D 0 close(3) =3D 0 openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDON= LY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D10540, ...}) =3D 0 mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) =3D 0xf771a000 close(3) =3D 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDO= NLY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D26400, ...}) =3D 0 mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) =3D 0xf7713000 close(3) =3D 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_L= ARGEFILE|O_CLOEXEC) =3D 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\= 0"..., 512) =3D 512 fstat64(3, {st_mode=3DS_IFREG|0644, st_size=3D13736, ...}) =3D 0 mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =3D 0xf770e0= 00 mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENY= WRITE, 3, 0x1000) =3D 0xf770f000 mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, = 0x2000) =3D 0xf7710000 mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DEN= YWRITE, 3, 0x2000) =3D 0xf7711000 close(3) =3D 0 mprotect(0xf7711000, 4096, PROT_READ) =3D 0 write(1, "Bitte melden Sie Fehler an cpufr"..., 52) =3D 52 openat(AT_FDCWD, "/proc/stat", O_RDONLY) =3D 3 fstat64(3, {st_mode=3DS_IFREG|0444, st_size=3D0, ...}) =3D 0 read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) =3D 1024 read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) =3D 266 read(3, "", 1024) =3D 0 close(3) =3D 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=3DS_IFDIR|0755, st_size=3D= 0, ...}) =3D 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=3DS_IFDIR|0755, st_size=3D= 0, ...}) =3D 0 write(1, "analysiere CPU 0:\n", 18) =3D 18 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O= _RDONLY) =3D -1 EACCES (Keine Berechtigung) openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_R= DONLY) =3D 3 read(3, "powernow-k8\n", 4095) =3D 12 close(3) =3D 0 write(1, " Treiber: powernow-k8\n", 23) =3D 23 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDO= NLY) =3D 3 read(3, "0 1\n", 4095) =3D 4 close(3) =3D 0 write(1, " Folgende CPUs laufen mit der g"..., 67) =3D 67 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RD= ONLY) =3D 3 read(3, "0 1\n", 4095) =3D 4 close(3) =3D 0 write(1, " Die Taktfrequenz folgender CPU"..., 71) =3D 71 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_l= atency", O_RDONLY) =3D 3 read(3, "109000\n", 4095) =3D 7 close(3) =3D 0 write(1, " Maximale Dauer eines Taktfrequ"..., 53) =3D 53 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O= _RDONLY) =3D 3 read(3, "2500000\n", 4095) =3D 8 close(3) =3D 0 write(1, " Hardwarebedingte Grenzen der T"..., 65) =3D 65 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_fr= equencies", O_RDONLY) =3D 3 read(3, "2500000 2400000 2200000 2000000 "..., 4095) =3D 49 close(3) =3D 0 write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) =3D 87 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_go= vernors", O_RDONLY) =3D 3 read(3, "ondemand performance \n", 4095) =3D 22 close(3) =3D 0 write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) =3D 42 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O= _RDONLY) =3D 3 read(3, "ondemand\n", 4095) =3D 9 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O= _RDONLY) =3D 3 read(3, "1000000\n", 4095) =3D 8 close(3) =3D 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O= _RDONLY) =3D 3 read(3, "2500000\n", 4095) =3D 8 close(3) =3D 0 write(1, " momentane Taktik: die Frequenz"..., 71) =3D 71 write(1, " liegen. Der "..., 153) =3D 153 write(1, " momentane Taktfrequenz ist 100"..., 39) =3D 39 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state"= , O_RDONLY) =3D 3 read(3,=20 Bits & B=C3=A4ume Dresden, Tour de Natur, GR=C3=9CNE LIGA, Konglomerat e. V= ., ADFC, (ex-)tuuwi, Hochschulgruppe Rad, Institut f=C3=BCr Bahntechnik Schlafende Projekte: CityConcierge, IKaRad, TerKur Neueste Idee: Radfernbahn Berlin-Dresden, Dresden-Leipzig -> radfernbahn.de & CityConcierge 4 Corona - http://jbechtel.de/site/sonstiges/covid19/CCfC/ --MP_/DHKDSFwCl89tLoR45ui7s6R Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename=Bug_cpufreq-info--01_killed.txt Bitte melden Sie Fehler an [email protected]. analysiere CPU 0: Treiber: powernow-k8 Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1 Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1 Maximale Dauer eines Taktfrequenzwechsels: 109 us. Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz m=C3=B6gliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.8= 0 GHz, 1000 MHz m=C3=B6gliche Regler: ondemand, performance momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz. liegen. Der Regler "ondemand" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet w= ird. momentane Taktfrequenz ist 2.40 GHz. Get=C3=B6tet --MP_/DHKDSFwCl89tLoR45ui7s6R Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename=Bug_cpufreq-info--02_hang.txt cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Bitte melden Sie Fehler an [email protected]. analysiere CPU 0: Treiber: powernow-k8 Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1 Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1 Maximale Dauer eines Taktfrequenzwechsels: 109 us. Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz m=C3=B6gliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.8= 0 GHz, 1000 MHz m=C3=B6gliche Regler: ondemand, performance momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz. liegen. Der Regler "ondemand" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet w= ird. momentane Taktfrequenz ist 1000 MHz. [Hanging unkillable here] --MP_/DHKDSFwCl89tLoR45ui7s6R Content-Type: text/plain Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=Bug_cpufreq-info--03_killed_strace_redacted.txt execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */) = 0 brk(NULL) = 0x565b7000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf770f000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0 openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0 mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76d9000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0 mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76d1000 mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76d3000 mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76d5000 mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76d7000 close(3) = 0 openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0 mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf74f3000 mprotect(0xf750c000, 1830912, PROT_NONE) = 0 mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf750c000 mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf765a000 mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76cb000 mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76ce000 close(3) = 0 set_thread_area({entry_number=-1, base_addr=0xf7710500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12) mprotect(0xf76cb000, 8192, PROT_READ) = 0 mprotect(0xf76d7000, 4096, PROT_READ) = 0 mprotect(0x565b5000, 4096, PROT_READ) = 0 mprotect(0xf773c000, 4096, PROT_READ) = 0 munmap(0xf76d9000, 220379) = 0 brk(NULL) = 0x565b7000 brk(0x565d8000) = 0x565d8000 brk(0x565d9000) = 0x565d9000 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf72f3000 mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7079000 close(3) = 0 fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0 write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63 openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) = 0 openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0 mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf770c000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0 mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7705000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0 mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7700000 mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf7701000 mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7702000 mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7703000 close(3) = 0 mprotect(0xf7703000, 4096, PROT_READ) = 0 write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52 openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) = 1024 read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 263 read(3, "", 1024) = 0 close(3) = 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 write(1, "analysiere CPU 0:\n", 18) = 18 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung) openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3 read(3, "powernow-k8\n", 4095) = 12 close(3) = 0 write(1, " Treiber: powernow-k8\n", 23) = 23 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3 read(3, "0 1\n", 4095) = 4 close(3) = 0 write(1, " Folgende CPUs laufen mit der g"..., 67) = 67 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3 read(3, "0 1\n", 4095) = 4 close(3) = 0 write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3 read(3, "109000\n", 4095) = 7 close(3) = 0 write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3 read(3, "2500000\n", 4095) = 8 close(3) = 0 write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3 read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49 close(3) = 0 write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3 read(3, "ondemand performance \n", 4095) = 22 close(3) = 0 write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3 read(3, "ondemand\n", 4095) = 9 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3 read(3, "2500000\n", 4095) = 8 close(3) = 0 write(1, " momentane Taktik: die Frequenz"..., 71) = 71 write(1, " liegen. Der "..., 153) = 153 write(1, " momentane Taktfrequenz ist 100"..., 39) = 39 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3 read(3, <unfinished ...>) = ? +++ killed by SIGKILL +++ --MP_/DHKDSFwCl89tLoR45ui7s6R Content-Type: text/plain Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=Bug_cpufreq-info--04_hang_strace_redacted.txt execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */) = 0 brk(NULL) = 0x5658c000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf771d000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/tls", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0 openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0 mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76e7000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0 mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76df000 mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76e1000 mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76e3000 mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76e5000 close(3) = 0 openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden) openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0 mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7501000 mprotect(0xf751a000, 1830912, PROT_NONE) = 0 mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf751a000 mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf7668000 mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76d9000 mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76dc000 close(3) = 0 set_thread_area({entry_number=-1, base_addr=0xf771e500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12) mprotect(0xf76d9000, 8192, PROT_READ) = 0 mprotect(0xf76e5000, 4096, PROT_READ) = 0 mprotect(0x5658a000, 4096, PROT_READ) = 0 mprotect(0xf774a000, 4096, PROT_READ) = 0 munmap(0xf76e7000, 220379) = 0 brk(NULL) = 0x5658c000 brk(0x565ad000) = 0x565ad000 brk(0x565ae000) = 0x565ae000 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7301000 mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7087000 close(3) = 0 fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0 write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63 openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995 read(3, "", 4096) = 0 close(3) = 0 openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0 mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf771a000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0 mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7713000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0 mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf770e000 mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf770f000 mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7710000 mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7711000 close(3) = 0 mprotect(0xf7711000, 4096, PROT_READ) = 0 write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52 openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) = 1024 read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 266 read(3, "", 1024) = 0 close(3) = 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 write(1, "analysiere CPU 0:\n", 18) = 18 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung) openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3 read(3, "powernow-k8\n", 4095) = 12 close(3) = 0 write(1, " Treiber: powernow-k8\n", 23) = 23 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3 read(3, "0 1\n", 4095) = 4 close(3) = 0 write(1, " Folgende CPUs laufen mit der g"..., 67) = 67 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3 read(3, "0 1\n", 4095) = 4 close(3) = 0 write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3 read(3, "109000\n", 4095) = 7 close(3) = 0 write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3 read(3, "2500000\n", 4095) = 8 close(3) = 0 write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3 read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49 close(3) = 0 write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3 read(3, "ondemand performance \n", 4095) = 22 close(3) = 0 write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3 read(3, "ondemand\n", 4095) = 9 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3 read(3, "1000000\n", 4095) = 8 close(3) = 0 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3 read(3, "2500000\n", 4095) = 8 close(3) = 0 write(1, " momentane Taktik: die Frequenz"..., 71) = 71 write(1, " liegen. Der "..., 153) = 153 write(1, " momentane Taktfrequenz ist 100"..., 39) = 39 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3 read(3, --MP_/DHKDSFwCl89tLoR45ui7s6R--