[PATCH RESEND v7 02/10] arm64: dts: qcom: shikra: Add DDR BWMON support

From: Sayantan Chakraborty <[email protected]>

Add CPU-to-DDR BWMON nodes and their corresponding opp tables for
Shikra SoC. This is necessary to enable power management and optimize
system performance from the perspective of dynamically changing DDR
frequencies.

Signed-off-by: Sayantan Chakraborty <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Komal Bajaj <[email protected]>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 40 ++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 524c88615d08..3582352dcff7 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -661,6 +661,46 @@ rclk-pins {
 			};
 		};
 
+		pmu@c91000 {
+			compatible = "qcom,shikra-cpu-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x00c91000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <1200000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <3072000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <4068000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <7216000>;
+				};
+			};
+		};
+
 		mem_noc: interconnect@d00000 {
 			compatible = "qcom,shikra-mem-noc-core";
 			reg = <0x0 0x00d00000 0x0 0x43080>;

-- 
2.34.1