[PATCH RESEND v7 05/10] arm64: dts: qcom: shikra: Add CDSP, LPAICP, MPSS remoteproc PAS nodes

From: Bibek Kumar Patro <[email protected]>

Add nodes for remoteproc PAS loader for CDSP, LPAICP, MPSS subsystem.

Signed-off-by: Bibek Kumar Patro <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Komal Bajaj <[email protected]>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 164 +++++++++++++++++++++++++++++++++++
 1 file changed, 164 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 42a17ffc040f..570505c927bb 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -1813,6 +1813,170 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 			};
 		};
 
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,shikra-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING 0>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+
+			power-domains = <&rpmpd RPMHPD_CX>;
+
+			memory-region = <&mpss_wlan_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING 0>;
+				mboxes = <&apcs_glb 12>;
+				qcom,remote-pid = <1>;
+				label = "mpss";
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b300000 {
+			compatible = "qcom,shikra-cdsp-pas";
+			reg = <0x0 0x0b300000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING 0>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+
+			power-domains = <&rpmpd RPMHPD_CX>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING 0>;
+				mboxes = <&apcs_glb 4>;
+				qcom,remote-pid = <5>;
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					label = "cdsp";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0201 0x0000>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0202 0x0000>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0203 0x0000>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x0204 0x0000>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x0205 0x0000>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x0206 0x0000>;
+					};
+
+					compute-cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&apps_smmu 0x0209 0x0000>;
+					};
+				};
+			};
+		};
+
+		remoteproc_lpaicp: remoteproc@b800000 {
+			compatible = "qcom,shikra-lpaicp-pas";
+			reg = <0x0 0x0b800000 0x0 0x200000>;
+
+			interrupts-extended = <&intc GIC_SPI 257 IRQ_TYPE_EDGE_RISING 0>,
+					      <&lmcu_smp2p_in 0 IRQ_TYPE_NONE>,
+					      <&lmcu_smp2p_in 1 IRQ_TYPE_NONE>,
+					      <&lmcu_smp2p_in 2 IRQ_TYPE_NONE>,
+					      <&lmcu_smp2p_in 3 IRQ_TYPE_NONE>;
+
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&lmcu_mem &lmcu_dtb_mem>;
+
+			qcom,smem-states = <&lmcu_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING 0>;
+				mboxes = <&apcs_glb 9>;
+				qcom,remote-pid = <26>;
+				label = "lpaicp";
+			};
+		};
+
 		sram@c11e000 {
 			compatible = "qcom,shikra-imem", "mmio-sram";
 			reg = <0x0 0x0c11e000 0x0 0x1000>;

-- 
2.34.1