[PATCH] dmaengine: fsl_raid: zero CF descriptor pool allocations

The compound frame descriptors and embedded CDBs are allocated from the
cf_desc_pool with dma_pool_alloc(), which does not zero the memory. Only
cdb32, the gfm coefficients and the frame address/length fields are
programmed; the dpi_dest_spec/dpi_src_spec fields in the CDBs and the
rbro32 field of each frame are left uninitialized. The hardware reads
the whole block (frame 0 length is sizeof(struct fsl_re_xor_cdb) or
sizeof(struct fsl_re_pq_cdb)), so uninitialized heap contents are
exposed to the device on each new descriptor.

Use dma_pool_zalloc() in both fsl_re_chan_alloc_desc() and
fsl_re_alloc_chan_resources() so the descriptor and CDB memory is
zeroed before it is handed to the RAID engine.

Fixes: ad80da658bbc ("dmaengine: Driver support for FSL RaidEngine device.")
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <[email protected]>
---
 drivers/dma/fsl_raid.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c
index 2d86f61105e5..1c316d85cfec 100644
--- a/drivers/dma/fsl_raid.c
+++ b/drivers/dma/fsl_raid.c
@@ -295,8 +295,8 @@ static struct fsl_re_desc *fsl_re_chan_alloc_desc(struct fsl_re_chan *re_chan,
 		if (!desc)
 			return NULL;
 
-		cf = dma_pool_alloc(re_chan->re_dev->cf_desc_pool, GFP_NOWAIT,
-				    &paddr);
+		cf = dma_pool_zalloc(re_chan->re_dev->cf_desc_pool, GFP_NOWAIT,
+				     &paddr);
 		if (!cf) {
 			kfree(desc);
 			return NULL;
@@ -584,8 +584,8 @@ static int fsl_re_alloc_chan_resources(struct dma_chan *chan)
 		if (!desc)
 			break;
 
-		cf = dma_pool_alloc(re_chan->re_dev->cf_desc_pool, GFP_KERNEL,
-				    &paddr);
+		cf = dma_pool_zalloc(re_chan->re_dev->cf_desc_pool, GFP_KERNEL,
+				     &paddr);
 		if (!cf) {
 			kfree(desc);
 			break;
-- 
2.55.0