[PATCH v2 12/13] dmaengine: ste_dma40: Validate memcpy configuration

d40_config_memcpy() builds a default memcpy configuration without passing
it through d40_validate_conf(). A dev_type supplied through the
memcpy-channels device tree property can therefore bypass the bounds
checks added for client configurations.

Validate the generated memcpy configuration before deriving logical
channel registers or allocating the channel.

Reported-by: [email protected]
Closes: https://lore.kernel.org/dmaengine/[email protected]/
Assisted-by: Codex:gpt-5-5
Signed-off-by: Linus Walleij <[email protected]>
---
 drivers/dma/ste_dma40.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index e0c694a1fc8b..49bca706b638 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2013,11 +2013,16 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
 static int d40_config_memcpy(struct d40_chan *d40c)
 {
 	dma_cap_mask_t cap = d40c->chan.device->cap_mask;
+	int ret;
 
 	if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
 		d40c->dma_cfg = dma40_memcpy_conf_log;
 		d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
 
+		ret = d40_validate_conf(d40c, &d40c->dma_cfg);
+		if (ret)
+			return ret;
+
 		d40_log_cfg(&d40c->dma_cfg,
 			    &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
 
@@ -2025,6 +2030,10 @@ static int d40_config_memcpy(struct d40_chan *d40c)
 		   dma_has_cap(DMA_SLAVE, cap)) {
 		d40c->dma_cfg = dma40_memcpy_conf_phy;
 
+		ret = d40_validate_conf(d40c, &d40c->dma_cfg);
+		if (ret)
+			return ret;
+
 		/* Generate interrupt at end of transfer or relink. */
 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
 

-- 
2.55.0