[syzbot] [dmaengine?] BUG: unable to handle kernel paging request in ioat_pci_probe

Hello,

syzbot found the following issue on:

HEAD commit:    9d2ed026f031 Merge tag 'sysctl-7.03-rc1' of git://git.kern..
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=11837a25580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=54b748b029440e0b
dashboard link: https://syzkaller.appspot.com/bug?extid=79a6b3f7a8df01f58774
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
userspace arch: i386
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=10830415580000

Downloadable assets:
disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/d900f083ada3/non_bootable_disk-9d2ed026.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/6c5c2e657d2b/vmlinux-9d2ed026.xz
kernel image: https://storage.googleapis.com/syzbot-assets/4d4c9e33af49/bzImage-9d2ed026.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: [email protected]

BUG: unable to handle page fault for address: 000000000001c0a8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 5523b067 P4D 5523b067 PUD 4c5b0067 PMD 0 
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5910 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:readb arch/x86/include/asm/io.h:57 [inline]
RIP: 0010:ioat_pci_probe+0x169/0x2880 drivers/dma/ioat/init.c:1365
Code: 4d 2f d3 ff 48 89 c3 48 85 c0 0f 84 de 1f 00 00 e8 cc 50 7c fc 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 ec 25 00 00 48 8b 03 <44> 8a 68 08 bf 2f 00 00 00 44 89 ee e8 b6 4a 7c fc 41 80 fd 2f 0f
RSP: 0018:ffffc90002daf7c8 EFLAGS: 00010246
RAX: 000000000001c0a0 RBX: ffff888028961238 RCX: 0000000000000000
RDX: ffff888029bc8000 RSI: ffffffff858deac4 RDI: 0000000000000001
RBP: ffff888021572000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffffff858de970 R15: ffff888021572130
FS:  0000000000000000(0000) GS:ffff8880969bd000(0063) knlGS:00000000571be480
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000000001c0a8 CR3: 0000000055268000 CR4: 0000000000352ef0
Call Trace:
 <TASK>
 local_pci_probe+0xdd/0x1b0 drivers/pci/pci-driver.c:332
 pci_call_probe+0x176/0x800 drivers/pci/pci-driver.c:394
 __pci_device_probe drivers/pci/pci-driver.c:455 [inline]
 pci_device_probe+0x1cd/0x370 drivers/pci/pci-driver.c:489
 call_driver_probe drivers/base/dd.c:628 [inline]
 really_probe+0x241/0xa60 drivers/base/dd.c:706
 __driver_probe_device+0x210/0x460 drivers/base/dd.c:868
 device_driver_attach+0xd1/0x220 drivers/base/dd.c:1203
 bind_store+0xf4/0x190 drivers/base/bus.c:267
 drv_attr_store+0x74/0xb0 drivers/base/bus.c:125
 sysfs_kf_write+0xf2/0x150 fs/sysfs/file.c:145
 kernfs_fop_write_iter+0x3e0/0x5f0 fs/kernfs/file.c:345
 new_sync_write fs/read_write.c:595 [inline]
 vfs_write+0x6af/0x1050 fs/read_write.c:687
 ksys_write+0x12a/0x250 fs/read_write.c:739
 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:79 [inline]
 __do_fast_syscall_32+0x13a/0x8b0 arch/x86/entry/syscall_32.c:291
 do_fast_syscall_32+0x32/0x70 arch/x86/entry/syscall_32.c:316
 entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf709efec
Code: Unable to access opcode bytes at 0xf709efc2.
RSP: 002b:00000000ff94267c EFLAGS: 00000292 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000080000600
RDX: 000000000000000d RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:
CR2: 000000000001c0a8
---[ end trace 0000000000000000 ]---
RIP: 0010:readb arch/x86/include/asm/io.h:57 [inline]
RIP: 0010:ioat_pci_probe+0x169/0x2880 drivers/dma/ioat/init.c:1365
Code: 4d 2f d3 ff 48 89 c3 48 85 c0 0f 84 de 1f 00 00 e8 cc 50 7c fc 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 ec 25 00 00 48 8b 03 <44> 8a 68 08 bf 2f 00 00 00 44 89 ee e8 b6 4a 7c fc 41 80 fd 2f 0f
RSP: 0018:ffffc90002daf7c8 EFLAGS: 00010246
RAX: 000000000001c0a0 RBX: ffff888028961238 RCX: 0000000000000000
RDX: ffff888029bc8000 RSI: ffffffff858deac4 RDI: 0000000000000001
RBP: ffff888021572000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffffff858de970 R15: ffff888021572130
FS:  0000000000000000(0000) GS:ffff8880969bd000(0063) knlGS:00000000571be480
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000f709f000 CR3: 0000000055268000 CR4: 0000000000352ef0
----------------
Code disassembly (best guess):
   0:	4d 2f                	rex.WRB (bad)
   2:	d3 ff                	sar    %cl,%edi
   4:	48 89 c3             	mov    %rax,%rbx
   7:	48 85 c0             	test   %rax,%rax
   a:	0f 84 de 1f 00 00    	je     0x1fee
  10:	e8 cc 50 7c fc       	call   0xfc7c50e1
  15:	48 89 d8             	mov    %rbx,%rax
  18:	48 c1 e8 03          	shr    $0x3,%rax
  1c:	42 80 3c 28 00       	cmpb   $0x0,(%rax,%r13,1)
  21:	0f 85 ec 25 00 00    	jne    0x2613
  27:	48 8b 03             	mov    (%rbx),%rax
* 2a:	44 8a 68 08          	mov    0x8(%rax),%r13b <-- trapping instruction
  2e:	bf 2f 00 00 00       	mov    $0x2f,%edi
  33:	44 89 ee             	mov    %r13d,%esi
  36:	e8 b6 4a 7c fc       	call   0xfc7c4af1
  3b:	41 80 fd 2f          	cmp    $0x2f,%r13b
  3f:	0f                   	.byte 0xf


---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at [email protected].

syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.

If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title

If you want syzbot to run the reproducer, reply with:
#syz test: git://repo/address.git branch-or-commit-hash
If you attach or paste a git patch, syzbot will apply it before testing.

If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)

If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report

If you want to undo deduplication, reply with:
#syz undup